668080
21
Zoom out
Zoom in
Previous page
1/36
Next page
Network configuration 21
Renkforce PL500D WiFi
4.3.1 PLC status
Here, you can see whether your devices are connected to a PLC network. To
display all connected PLC devices, click either the house icon or the PLC
dev
ices arrow. Each connected PLC device, regardless of whether it is
con-
nected locally or remotely in the network, is displayed with its MAC address,
name
and type. Clicking the lock icon brings you directly to the PLC settings
(see 'PLC settings').
You can add additional PLC devices to your PLC network by tapping on Add
dev
ice. To do this, enter the security ID for the respective PLC adapter in the
Security ID field and confirm with Save.
Before the networking procedure, note the security IDs of all PLC adapters.
This unique identifier of each PLC device is located o
n the label on the hous-
ing. It consists of 4 x 4 letters separated
by dashes (e.g. ANJR-KMOR-KSHT-
QRUV). Ensure that all PLC adapters are connected to the power grid and
computers or other network components as appropriate.
4.3.2 WLAN status
Here, you can see whether the Wi-Fi connection is switched on or switched
off and whether Wi-Fi Move Technology is activated (see 'WiFi Move'). Click-
ing the Wi-Fi icon brings you directly to the WLAN config
uration (see 'WLAN
configuration'). Click on the WLAN monitor arrow to have all of the known
Wi-Fi devices displayed. Each Wi-Fi station kn
own since the last system start
is displayed together with its name, MAC and IP address and the last login
date, along with the speed if possible if there is an Internet connection and a
time server was found.
Clicking the lock icon of the access point brings you directly to the Wi-Fi con-
figuration area (see 'Access point'), where you can configure settings for Wi-
Fi network security.
4.3.3 Ethernet status
The status of the network connection is displayed in this area.
4.4 Device configuration
In the device configuration area, you can modify settings for device security,
network, HomePlug (PLC), date and time and LED.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Renkforce PL500D WiFi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Renkforce PL500D WiFi in the language / languages: English as an attachment in your email.

The manual is 0,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info