Manual Renkforce BSD-3023 (page 62 of 177) (English, German, Dutch, French)

486358

Zoom out

Zoom in

1/177



Operating Instructions

English

Electrical Connection

Insertion/Replacement of the Remote Control Battery

Observe correct polarity when inserting battery.

Do not let batteries lying around openly; there is a danger that they are swallowed by children

or pets. If swallowed, see a doctor immediately.

Leaking or damaged batteries may cause caustic burns when touching skin. Therefore, use

suitable protective gloves in this case.

Ensure that the battery is not short-circuited or thrown into fire. It also must not be recharged.

There is a danger of explosion.

Remove the battery if you do not use it for an extended period of time.

• Take the remote control from the steering wheel holder as described above.

• Slide open the battery compartment lid at the rear of the remote control and remove it.

• Put in a new 3V lithium button cell CR2025 in the correct polarity. The positive pole of the battery must point

upwards for this.

• Close the battery compartment again. The latching tab must latch audibly.

• Attach the remote control in the steering wheel holder again as described above.

• If the remote control no longer works properly, the battery is discharged and must be replaced with a new battery

of the same type.

• The battery is changed as described above.

• Replace the discharged battery with a new battery of the same type.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Renkforce BSD-3023 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Renkforce BSD-3023 Manual

Product: