Manual Renkforce AR-2808 (page 49 of 124) (English, German, Dutch, French)

651424

Zoom out

Zoom in

1/124

Erase option 1 - Erase an unused card

1. Scan the master card 2x to

activate program group 2

2. Select

Erase option 1

3. Erase the

unused access

cards

4. Exit programming

mode

1. Scan the master card 2x to activate program group 2 (erasing access cards).

The blue status LED ashes during programming and LED 2 of the power indicator lights

up. After approx. 2 seconds, 2 beeps sound for conrmation and power indicator LEDs

1, 2 and 3 ash to indicate the 3 available erase options.

2. Press the doorbell key to select Erase option 1.

Power indicator LED 1 lights up. After approx. 2 seconds, 2 beeps sound to conrm the

selection.

3. Scan unused card (e.g. in case of change of personnel).

Scan several cards one at a time to erase each. For each card erased, the corresponding

memory group LED lights up for approx. 1 second. 2 beeps sound for conrmation.

4. Scan the master card 1x to exit programming mode.

2 beeps sound. This conrms that the product is in normal operation mode.

Erase option 2 - Erase a lost card

1. Scan the master card 2x to

activate program group 2

2. Select

Erase option 2

3. Erase the

lost cards

4. Exit programming

mode

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Renkforce AR-2808 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Renkforce AR-2808 Manual

Product: