656686

Renkforce 1208459 Manual

2
Zoom out
Zoom in
Previous page
1/3
Next page
Select one of the address codes (I, II, III, IV) on the handheld radio transmitter via the sliding switch (C).
Set exactly the same address code on the radio-controlled switch socket(s).
If you set a different code on the handheld radio transmitter and the radio- controlled switch sock-
et, the switch socket will not react to the switching commands on the handheld radio transmitter!
For the settings of the radio-controlled switch socket please refer to its operating instructions.
Operation
If you press the “ON” button of the corresponding switching channel (1, 2, 3 or 4), the respective radio-
controlled switch socket is activated. The red control LED on the radio-controlled switch socket has to
light up and the load connected to it will be switched on.
The radio-controlled switch socket and the load connected to it are switched off using the “OFF” key of
the corresponding switching channel.
Please consult the operating instructions for further information on the radio-controlled switch socket.
Maintenance and cleaning
The product is maintenance free for you; never open/dismantle it (except for inserting/replacing the bat-
tery as described in these operating instructions).
Only clean the product with a soft, clean, dry cloth. Never use aggressive cleaning agents or chemical
solutions since these could damage the surface of the casing or impair operation.
Range
The transmission range of the radio signals, between the handheld transmitter and the radio-controlled
switch sockets, is up to 30 m under optimum conditions.
This value, however, is the so-called “open space range” (the range when transmitter and
receiver are visible to each other, without interfering influences).
In practice, however, there may be walls, room ceilings, etc. between the transmitter and the
receiver which reduce the range accordingly.
Due to the different influences on the wireless transmission, no specific range can be guaran-
teed.
However, trouble-free operation is usually possible in a single family house.
Sometimes the range can be considerably reduced due to:
• Walls, reinforced concrete ceilings
• Coated/metallised insulated glass
• Proximity to metallic & conductive objects (e.g., heating elements)
• Proximity to human bodies
• Broadband interferences, e.g., in residential areas (DECT telephones, mobiles, radio-controlled head-
phones, radio-controlled speakers, other radio-controlled weather stations, baby phones, etc.)
• Proximity to electric motors, transformers, power-supply units, computers
•
Proximity to badly shielded or uncovered computers in use or other electrical appliances
Disposal
a) General
Please dispose of the device, when it is no longer of use, according to current statutory re-
quirements.
Remove the inserted battery and dispose of it separately from the product.
b) Normal and rechargeable batteries
As the end user, you are required by law (Battery Regulation) to return used batteries and rechargeable
batteries. Do not dispose of used batteries in the household waste!
Contaminated batteries/rechargeable batteries are labelled with this symbol to indicate that
disposal in the domestic waste is forbidden. The symbols of the critical heavy metals are:
Cd=Cadmium, Hg=Mercury, Pb=Lead (name written on the battery/rechargeable battery, e.g.,
under the rubbish bin symbol on the left).
You can return your used batteries/rechargeable batteries free of charge at the official collection points of
your community, in our stores, or at places where batteries or rechargeable batteries are sold.
You thereby fulfil your statutory obligations and contribute to the protection of the environment.
Declaration of Conformity (DOC)
We, Conrad Electronic, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that this product con-
forms to the fundamental requirements and the other relevant regulations of the directive 1999/5/EC.
You can find the conformity declaration for this product at www.conrad.com.
Technical Data
Power supply .....................................................1x 12 V battery, type “23A”
Transmission frequency ................................... 433 MHz
Address codes...................................................4 (to be set via the sliding switch I, II, III, IV)
Switching channels ..........................................4 (each with “ON”/”OFF”-button)
Range ..................................................................up to 30 m (open space, see chapter “Range”)
LED.......................................................................lights up briefly, when the buttons are used
G
Operating Instructions
Additional remote control, 433 MHz
Item no. 1208459
Intended Use
The product is used as an additional handheld radio transmitter for the suitable radio-controlled switch
set (available separately).
Always observe the safety instructions and all other information included in these operating instructions!
This product complies with the applicable national and European requirements. All names of companies
and products are the trademarks of the respective owners. All rights reserved.
Package contents
• Handheld radio transmitter
• 12 V battery (type 23 A)
• Operating instructions
Safety Instructions
Damages due to failure to follow these operating instructions will void the warranty/guarantee!
We do not assume any liability for any resulting damage!
We do not assume any liability for material and personal damage caused by improper use or
non-compliance with the safety instructions! In such cases, the warranty/guarantee will be
null and void.
• Unauthorised conversion and/or modification of the product is not allowed for safety and
approval reasons (CE).
• The product is not a toy and should be kept out of the reach of children!
• Do not use this product in hospitals or medical institutions. Although the product only emits
relatively weak radio signals, these may lead to the malfunction of life-support systems.
The same may also apply to other zones.
• The product must only be used in dry interiors, it must not get damp or wet.
• Do not leave packaging material carelessly lying around, since it could become a danger-
ous plaything for children.
• Handle the product with care, it can be damaged by impacts, blows, or accidental falls,
even from a low height.
General Battery Instructions
• Batteries should be kept out of the reach of children.
•
Do not leave batteries lying around; there is a risk of them being swallowed by children or domestic
animals. If they are swallowed, consult a doctor immediately.
• Leaking or damaged batteries can lead to caustic burning of the skin. Therefore, use suitable protective
gloves.
Liquids leaking from batteries are very chemically aggressive. Objects or surfaces coming into contact
with these liquids might be considerably damaged. Thus, store batteries in a suitable location.
• Batteries must not be short-circuited, opened or thrown into fire. There is a risk of explosion!
•
Do not recharge standard, non-rechargeable batteries, danger of explosion!
• Please pay attention to the correct polarity (plus/+ and minus/-) when inserting the battery.
Controls
ON
OFF
1
2
3
4
A
B
C
D
-
+
A Control-LED (lights up on use of buttons)
B Keypad for switching channels 1 bis 4 (left column
“ON” = On, right column “OFF” = Off)
C Coding switch I, II, III, IV for one of the four
address codes
D Battery compartment
Inserting/Replacing the Battery
Open the battery compartment (D) on the back of the handheld radio transmitter and insert a type “23A”
battery with the correct polarity (observe imprint in the battery compartment or the figure above). Close
the battery compartment again.
The batteries need to be replaced if the range of the handheld radio transmitter is significantly reduced or
the control-LED (A) no longer lights when the buttons are used.
Setting the Address Codes
One of the four address codes (I, II, III, IV) can be set on both the handheld radio transmitter and the radio-
controlled switch socket. Therefore, up to four identical radio-controlled switch sets can be operated
without influencing each other.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2014 by Conrad Electronic SE.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Renkforce 1208459 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Renkforce 1208459 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info