569770
9
Zoom out
Zoom in
Previous page
1/51
Next page
Rendama
x
12 Doc890/3456CV02B
1.5 General restrictions
The application, installation and maintenance of Rendamax products must always be carried out
in accordance with the requirements (legal or otherwise), specifi cations and standards applicable
to such installations.
All data, information and suggestions provided by Rendamax B.V. in relation to its products are
based on careful investigation. Nevertheless, neither Rendamax B.V. nor any other organisation
connected with Rendamax B.V. accepts any liability for application, installation or exploitation
that occurs outside its sphere of infl uence.
Changes may be incorporated without prior notice.
Rendamax accepts no obligation to adapt previously deliv ered products to incorporate such
changes.
2 Description
2.1 General
The R3400/R3500/R3600 series are environmentally friendly modulat ing gas fi red heating boilers
that can vary its output from 25% to 100% of its maximum capacity. The series R3400 consists of
6 types in a range from 657 to 1189 kW.
The series R3500 consists of 5 types in a range from 613 to 1000 kW. The series R3600 consists of
5 types in a range from 631 to 1031 kW.
The units have an extremely low emission of NO
x
and CO, so that this boiler satisfi es the most
stringent European require ments.
The R3400/R3500/R3600 series have CE approval for the following countries:
Austria, Belgium, Denmark, France, Germany, Ireland, Italy, The Netherlands, Spain and the
United Kingdom.
The series is registered under the product identi cation number 0063AR3514.
The units can be supplied either as a standard (category B23) or a room sealed (categories C53,
C33 or C63) appliance.
Working principle and construction
Air is blown into the appliance, as required, by a speed-con trolled fan and thoroughly mixed with
gas in the correct propor tions.
A temperature controller compares the desired water tempera ture with the temperature of the
water fl ow and sends a signal to the frequency converter to maintain the correct heating capacity.
The gas/air mixture so formed is passed through a cooled premix burner and ignited. The premix
burner is constructed of fi nned bimetallic pipes (internally from stainless steel and externally
from aluminium) with cast iron water headers.
Heat transfer takes place in two or three heat exchangers. The fi rst heat exchanger is constructed
from smooth stainless steel pipes, while the second heat exchanger is fi tted with laser welded,
stainless steel fi nned pipes. Both heat exchangers are fi tted with cast iron profi led water distribu-
tion components (headers) which guarantee an optimum water fl ow through the appliance.
The burner and the heat exchangers are connected in series.
At the R3600 a third heat exchanger is attached wich consists of one or more stainless steel fi n
tube(s), switched in series, in form of a spiral. It is arranged on the back of the boiler on the fl ue
gas collection chamber.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rendamax R3600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rendamax R3600 in the language / languages: English as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info