569769
42
Zoom out
Zoom in
Previous page
1/51
Next page
Rendama
x
Doc890/3456CV02B 45
6 Operating instructions
6.1 Function
When a heating demand is received and before the boiler starts up, the appliance must be pre-
purged.
Gas and air are optimally mixed in the mixing chamber. The fan supplies air for combustion, the
quantity being regulated by the frequency controlled fan speed. A proportional controller deter-
mines (also by means of regulation) the required quantity of gas. Thereafter, the gas air mixture
is ignited in min. load on the pilot burner wich is a part of the main burner. After measuring of the
ionisation current the main gas valve will be opened and the ionisation measurement switches to
the main burner. The fan also ensures that the resulting fl ue gasses are subsequently removed.
The removal system for these gasses performs an essential function for the proper operation of
the appliance.
The unit has no limits for return water temperature. If this tem perature is low, condensation will
be formed which will then be removed via the drainage system.
6.2 Regulation
Depending on the heating demand, the unit will be started up and shut down between 0% and
25% capacity and will be continuously modulated between 25% and 100% capacity.
6.3 Control module
Lid closed Lid open
Fig. 32 Control module
1 function 1 parameter indication
K standby P1 current/setting boiler supply temp.
F automatic operation P2 current/setting domestic hot water
t summer operation temperature
W1 manual operation min. P3 desired temperature
W2 manual operation max. P5 current external temperature
2 function selector P8 current low velocity header temp.
3 fault indication w P9 current boiler capacity
4 supply temperature P10 password entry for factory settings
5 malfunction code ( ashing) 2 optical I/O
3 reset/programming push-button
4 alarm LED
5 parameter/value selector
6 output status
7 current/desired parameter value
8 fault/parameter indication
9 input status
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rendamax R3500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rendamax R3500 in the language / languages: English as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info