569768
34
Zoom out
Zoom in
Previous page
1/51
Next page
Rendama
x
Doc890/3456CV02B 37
The connection to the drain must be arranged such that there is an open connection under the
condensate discharge point on the appliance (see fi g. 23). In addition, the discharge pipe must be
tted with a trap (U-bend) in accordance with the applicable regulations.
Ensure that the distance between the condensate discharge point of the boiler trap and the drain-
age pipe is at least 5 mm. This provides the required open connection and simplifi es any subse-
quent maintenance activities and inspections.
Fig. 23 Condensate discharge
5.4 Hydraulic system
5.4.1 General
Although it is not the intention to provide a complete handbook covering the most divergent
hydraulic systems, the data is more extensive than would generally be provided in the case of
conventional central heating boilers.
The R3400/R3500/R3600 units are low water content boilers for which the water fl ow rates must
be within minimum and maxi mum values.
Table 12 - 14 lists the required relationship between the three parameters Q (water fl ow), P (pres-
sure) and t (temperature) at maximum capacity. Because of the high fl ow rate, the appli ance is
less sensitive to water hardness. Therefore, the water hardness may not exceed 250 ppm with a
supply temperature of 80°C (see 5.4.5 Water quality).
5.4.2 Water fl ow
5.4.2.1 Flow rate and resistance
The rate of water fl ow through the appliance must never fall below the required minimum (oth-
erwise the water fl ow switsch will be activated and the appliance will be shut down). The use of
valves, non-return valves, systems in which several appli ances are connected to a common trans-
port system, etc., must not interfere with the required water circulation.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Rendamax R3400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Rendamax R3400 in the language / languages: English as an attachment in your email.

The manual is 1,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info