726826
49
Zoom out
Zoom in
Previous page
1/60
Next page
14 Care and maintenance
Regular care and observation of some basic points
will ensure trouble-free operation and a long
service life.
DANGER!
Prior to performing any work, ensure the equip-
ment is disconnected from the voltage supply
and secured to prevent accidental switch-on!
Care
n Ensure the unit is protected against dirt, mould
and other deposits.
n Only clean the unit using a damp cloth. Do not
use any caustic, abrasive or solvent-based
cleaning products. Do not use a jet of water.
n Clean the fins on the unit prior to long shut-
down periods.
Maintenance
n It is recommended that you take out a mainte-
nance contract with an annual service from an
appropriate specialist firm.
This enables you to ensure the operational reli-
ability of the plant at all times!
Air filter for indoor unit
The cleaning interval for the air filter in the unit is
decisively dependent on the quality of the room air.
If the room air is extensively contaminated with
solid particles, the air filter should be checked and
cleaned at an appropriately frequent interval.
Type of task
Checks/maintenance/inspection
Commis-
sioning
Monthly Half-
yearly
Yearly
General
l
l
Medium cycle bleeding
l
l
Check medium filling
l
l
Contamination of fin register
l l
Filter contamination
l l
Check voltage and current
l
l
Check function of fan
l
l
Check condensate drainage
l
l
Check insulation
l
l
1)
see note
Cleaning the housing
1. Disconnect the power supply to the unit.
2. Open and fold the intake grill on the front
side upwards.
3. Clean the grill and housing using a soft,
damp cloth.
4. Switch the power supply back on.
Cleaning the filter
1. Disconnect the power supply to the unit.
2. Open the front side of the unit by folding the
grill upwards and allowing it to engage
(Fig. 37).
3. Raise the filter and pull it out in a downwards
direction (
Fig. 37).
4. Clean the filter with a commercially available
vacuum cleaner (
Fig. 38). To do so, turn the
dirty side so it is facing upwards.
49
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO WLT-EC serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO WLT-EC serie in the language / languages: English as an attachment in your email.

The manual is 6,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO WLT-EC serie

REMKO WLT-EC serie User Manual - German - 60 pages

REMKO WLT-EC serie User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info