726826
29
Zoom out
Zoom in
Previous page
1/60
Next page
"NETWORK" key
The "NETWORK" key enables the settings on the
master unit (leading unit) to be transferred to all
slave units (following units) on the network. All
units confirm that they have received the settings
correctly by beeping. The infrared remote controls
do not copy the changed settings. Press and hold
the key for 3 seconds to transfer
. However, each
individual unit can still be operated individually.
NETWORK
A
Fig. 25: "NETWORK" key
A: Transfer to all units. Confirmation by means of
a signal tone
Master/slave behaviour
If multiple units are installed, for example within a
room, a higher-level unit (leading unit = master)
can transfer the remote control's settings to all
lower-level units (following unit = slave). T
o transfer
the data, the leading unit (master) is connected to
the following units (slave). The master unit can be
operated via a standard infrared remote control or
via a fixed cabled remote control (accessory). The
data that is sent is then transferred to all other
slave units via the internal bus line. The number of
slave units is limited to 31.
00 01 02 31
Master Slave
Fig. 26: "NETWORK" key - Master/slave behaviour
Two different network variants are available:
1. Operating a group:
Leading unit (master) function:
Standard IR or alternative cabled remote control of
the
master unit can address the master and all
slave units .
Subsequent unit (slave) function:
Standard IR or alternative cabled remote control of
the slave unit can operate the addressed slave unit
only .
Operating a group or specific units within a
group:
Leading unit (master) function:
Cabled remote control available as an accessory
for the master unit can address the master unit, all
slave units as a group or individual slave units sep-
arately . Subsequent unit (slave) function:
Cabled remote control available as an accessory
for the slave unit can operate the connected slave
unit only.
29
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO WLT-EC serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO WLT-EC serie in the language / languages: English as an attachment in your email.

The manual is 6,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO WLT-EC serie

REMKO WLT-EC serie User Manual - German - 60 pages

REMKO WLT-EC serie User Manual - Dutch - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info