587851
20
Zoom out
Zoom in
Previous page
1/32
Next page
Installation
Installing the unit
The indoor unit is mounted face
down on four threaded rods. Take
into account the ceiling grid and
any other installations.
1. Use the dimensions of the
ceiling cassette (Fig 8) to
mark the fixing points for the
threaded rods on structural
parts approved to support the
static load above the suspended
ceiling.
2. Fit any connection nozzles
before installing the unit
if connections to a second
room or a fresh air intake are
required.
Installation should only be
performed by authorised
specialists.
NOTE
8 Mounting the unit
280
615
Dimensions in mm SV 261-681
Distance A 35 mm
Distance B 25 mm
Mounting the unit 615 mm x 280 mm
9 Hooking in the unit
See section Connections to
a second room or a fresh air
intake.
3. Fit the indoor unit onto the
threaded rods and use the
lower nuts to level the unit
(Fig 9).
This ensures that the
condensation drains into the
collection tray.
4. Make sure that clearance A,
(Fig 10) as specified in the table
below, is provided between the
underside of the suspended
unit and the underside of the
fastening surface.
5. Connect the refrigerant
pipes, electrical cables and
condensation pipe to the indoor
unit as described below.
6. Check that the unit is level.
The units are factory filled with
dry nitrogen to check for leaks.
The pressurised nitrogen is
released when loosening the
union nuts.
CAUTION
7. The final task is to tighten the
counternuts and attach the
cover.
10 Fastening the unit
Structural component
Structural component
B
A
All dimensions in mm
Connecting the refrigerant
pipes
The connections to the refrigerant
pipes are made at the rear of the
unit (responsibility of customer).
It may be necessary to fit a reducer
or flared adapter to the indoor
unit. These fittings are included
as standard. Once installed, the
connections should be made tight
against vapour diffusion.
The procedures for installing the
refrigerant circuit and mounting
the indoor unit and outdoor
component are described below.
1. The required pipe diameters are
given in the table "Technical
data"
REMKO SV
20
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO SV351 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO SV351 in the language / languages: English as an attachment in your email.

The manual is 3,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO SV351

REMKO SV351 User Manual - German - 32 pages

REMKO SV351 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info