587850
26
Zoom out
Zoom in
Previous page
1/32
Next page
Before commissioning
After the tightness check has
been successfully completed,
connect the vacuum pump via
the pressure gauge station to the
valve connections on the outdoor
component (see chapter "Tightness
check") and create a vacuum.
Perform the following checks
prior to commissioning the
unit for the first time and after
any interventions affecting the
refrigerant circuit. Record the
results in the commissioning report:
Check all refrigerant pipes and
valves using leak detection spray
or soapy water to ensure they
are tight and that the suction
and injection pipes are not
accidentally mixed up.
Perform this check when the
unit is not running.
Check the refrigerant pipes and
insulation for signs of damage.
Check the correct polarity of the
connection between the indoor
unit and outdoor component.
Add refrigerant
The equipment contains a basic
quantity of refrigerant.
Extra refrigerant must be added if
the basic length of the refrigerant
pipes exceeds 5 metres. Refer to
the following table:
SV
261
SV
351
SV
521
SV
681
Basic pipe
length
Additional fill quantity
Up to and incl.
5 m
-
5 m to max.
15/25 m
25
g/m
25
g/m
25
g/m
45
g/m
Commissioning
SV 261-681 AT
Colour code
WH = white
BU = blue
BR = brown
BK = black
1
2
3
L
N
Liquefier fan
Compressor
Compressor
contator
Reverse flow valve
Mains cable
230V / 1~ / 50 Hz
Note that the employed refrig-
erant is always filled in liquid
form!
CAUTION
NOTE
Check the overheating to
determine the refrigerant fill
quantity.
Wear protective clothing when
handling refrigerant.
CAUTION
Commissioning should only be
performed and documented
by specially trained personnel.
NOTE
The system can be commissioned
once all the components have
been connected and tested.
A functional check should be
performed to verify its correct
function and identify any unusual
operational behaviour prior to
handing it over to the operator.
Check that all fastenings,
mountings etc. are firm and at
the correct level.
REMKO SV
26
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO SV261 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO SV261 in the language / languages: English as an attachment in your email.

The manual is 3,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO SV261

REMKO SV261 User Manual - German - 32 pages

REMKO SV261 User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info