726816
91
Zoom out
Zoom in
Previous page
1/120
Next page
Setting the impulse rate of the solar medium flow rate probe
The impulse rate must only be changed if the impulse rate in the customer-provided system must be
adapted.
Menu item Parameter Factory setting
Impulse rate for medium flow rate
(if activated)
0 - 10 ml/Imp 5.7 ml/Imp
Manual medium flow rate
If no medium flow rate probe is installed in the solar station, a manual medium flow rate can be selected. The
heat meter can also be deactivated, if desired.
The medium flow rate is specified in order to calculate the amount of solar heat.
The value can be viewed on the flow meter when the solar pump is running.
Then set the value.
Recommendation:
adjust the medium flow rate to suit the hydraulic system provided by the customer
Set temperature of the storage tank during solar charging
Once the solar set temperature is reached, the solar cycle pump is switched off. With the collector cooling
function activated, the temperature of the storage tank can continue to rise as far as the set maximum tem-
perature.
The solar set temperature should be reduced if the hot water temperature is regularly too high or if there is
no thermostatic mixing valve installed. At the same time, when the collector cooling function is activated, the
max. temperature of the storage tank must be reduced.
Menu item Parameter Factory setting
Solar set temperature 5 °C - 95 °C 85 °C
REMKO recommends installing a domestic hot water mixer with solar hot water preparation.
WARNING!
Implement measures on site to ensure suf
ficient scalding protection!
91
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO Smart-Control-Touch SQW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO Smart-Control-Touch SQW in the language / languages: English as an attachment in your email.

The manual is 5,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO Smart-Control-Touch SQW

REMKO Smart-Control-Touch SQW User Manual - German - 80 pages

REMKO Smart-Control-Touch SQW User Manual - Dutch - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info