726816
38
Zoom out
Zoom in
Previous page
1/120
Next page
Fig. 49: Select “Mode” menu item
In the "heating/cooling" parameter level you must
select the “Mode” level.
In the "Mode" parameter level you will find the "Dif-
ference from heating limit” parameter
.
Set the desired value at which the heating opera-
tion of the heat pump should be switched off. The
value 0.0 K means that the heat pump only
switches to summer mode if the room set tempera-
ture (Fig. 45), e.g. 20 °C, is reached at the external
probe. Please note the diagram in Fig. 43 for infor-
mation on which value should be set here.
An example setting:
The “colder/hotter” parameter (room target temper-
ature) of +2 °C means a desired room temperature
of +22 °C.
The “Difference from heating limit” parameter
(summer/winter changeover) of 7.0 K means
heating operation of the heat pump up to an out-
side temperature of +15 °C
(+22 °C room target temperature - 7.0 K “colder/
hotter” = +15 °C).
The heating operation is interrupted when the
desired heating limit is exceeded and after the time
stored for the building time constant has passed.
Only the hot water supply is still active.
The building time constant is preset by REMKO in
the factory at 10 hours. Setting the building time
constant should prevent the heat pump from
cycling. The better the building standard, the
longer the possible setting of the building time con-
stant. This value can only be changed in the expert
level and must generally only be saved once. Y
ou
will find the parameter “Building time constant” in
the expert level (password protected), "Settings"
" "Heating/cooling" " "Building adaptation".
Fig. 50: Select “Difference from heating limit” menu
item
REMKO Smart-Control Touch
38
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO Smart-Control-Touch SQW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO Smart-Control-Touch SQW in the language / languages: English as an attachment in your email.

The manual is 5,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO Smart-Control-Touch SQW

REMKO Smart-Control-Touch SQW User Manual - German - 80 pages

REMKO Smart-Control-Touch SQW User Manual - Dutch - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info