587834
22
Zoom out
Zoom in
Previous page
1/56
Next page
All electrical installation work
is to be performed by specialist
companies. Disconnect the
power supply when connecting
the electrical terminals.
!
CAUTION
Electrical connection
For RXT 351-1401DC units,
a protected mains supply cable and
control cable should be connected
to the outdoor component and
indoor unit respectively.
NOTE
We recommend using
shielded cable for the control
lines.
Connecting the indoor unit
The unit requires a six-wired
control cable from the indoor unit
to the outdoor component.
We recommend that a mains/
repair switch be installed near
the outdoor component.
Voltage is supplied to the
outdoor component, the indoor
unit is supplied through the
control cable between the
outdoor component and the
indoor unit.
The terminal blocks for making
the connections are located
inside the unit.
If an optional condensation
pump is used in conjunction
with the unit, it may be
necessary to install an
additional relay with a higher
contact rating after the switch-
off contact on the pump to
switch off the compressor.
Make the connection as follows:
1. The connection terminal block
is located inside the unit on the
right-hand side (Fig. 12).
2. Connect the unit to the
control cable from the outdoor
component.
See “Electrical connection
diagram”.
3. Re-assemble the unit.
12
Connecting the indoor unit
2
1
2
1
2
1
Electrical connection (terminal box)
Refrigerant connection
REMKO RXT...DC
22
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO RXT521 DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO RXT521 DC in the language / languages: English as an attachment in your email.

The manual is 3,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO RXT521 DC

REMKO RXT521 DC User Manual - German - 52 pages

REMKO RXT521 DC User Manual - French - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info