726564
52
Zoom out
Zoom in
Previous page
1/76
Next page
Error code: E1
Reason: The indoor unit does not receive a signal from the outdoor unit within 110 seconds. The
check is performed 4 times in a row
, then error E1 is displayed.
Cause:
n Electrical connection not configured correctly
n Control boards outdoor unit or indoor unit defective
Switch off voltage, switch on again 2 minutes
later
. Is the error still present?
YES
Measure the voltage between the “S” and “N”
terminals of the outdoor unit. Does the valve
fluctuate between -25 V and 25 V?
NO
Check electrical connections in the indoor unit.
Are they OK?
YES
YES
Check electrical connections in the outdoor
unit. Are they OK?
Replace the control boards of the indoor unit. Is
the error rectified?
YES
NO
Is the transformer OK?
Replace the control boards of the outdoor unit
NO
Replace the transformer
YES
Replace the control boards of the outdoor unit.
Is the error rectified?
NO
Replace the control boards of the indoor unit
Fig. 42: Transformer measurement
Check the transformer (must not be connected to a
condenser) with a multimeter
. The normal value is
approx. 0 Ohm. If the value deviates, replace the
transformer.
REMKO RVT series
52
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO RVT 265 DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO RVT 265 DC in the language / languages: English as an attachment in your email.

The manual is 4,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO RVT 265 DC

REMKO RVT 265 DC User Manual - German - 76 pages

REMKO RVT 265 DC User Manual - Dutch - 76 pages

REMKO RVT 265 DC User Manual - French - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info