726821
26
Zoom out
Zoom in
Previous page
1/44
Next page
Care and maintenance Shutdown
Temporary shutdown
1.
Shut down the cold water
consumers connected
to the system.
2. Switch the unit off via
the internal controller in
the chiller (or using the remote
control).
3. Check the percentage
concentration of glycol.
4. Check the unit for visible signs
of damage and clean it as
described in the "Care and
maintenance" chapter.
5. As much as possible, cover
the unit with a plastic foil
to protect it against the
weather.
Permanent shutdown
Ensure that units and components
are disposed of in accordance with
local regulations, e.g. through
authorised disposal and recycling
specialists or at collection points.
REMKO GmbH & Co. KG or your
contractual partner will be pleased
to provide a list of certified firms
in your area.
Regular care and observation
of some basic points will ensure
trouble-free operation and a long
service life.
Wearing appropriate
protective clothing is necessary
when working on the units.
Care
Ensure the unit is protected
against dirt, mould and other
deposits.
Clean the unit using a damp
cloth.
Do not use a jet of water.
Do not use any caustic, abrasive
or solvent-based cleaning
products.
Clean the fins on the unit prior
to long shutdown periods.
Maintenance/leak testing
We recommend that you take
out a maintenance contract
with an annual service from
an appropriate specialist firm.
The legally stipulated
maintenance intervals are
defined in EC ordinance no.
517/2014 of the European
Council.
Type of task
Checks / Maintenance/Inspection
Commis-
sioning
Monthly
Half-yearly
Yearly
General
Clean dirt traps
Check medium filling
Check circulation pump
Dirt/damage condenser
Check quality of the glycol
Measure voltage and current
Check direction of rotation
Check compressor
Check fan
Check the refrigerant volume
Check condensate drainage
Check insulation
Sealing test for cooling cycle
1)
Statutory regulations require
a leak test for the cooling cycle
dependent on the GWP value.
Inspection and documentation
of the work performed is
to be carried out by specialist
technicians.
NOTE
1) see note
!
CAUTION
If only water and not a
mixture of water and glycol
is used, in regions subject
to freezing, water must be
drained from components
when these are at standstill.
The drained water volume
must be replaced when
components are put back into
operation!
CAUTION
!
Prior to performing any work,
ensure that the equipment
is isolated from the power
supply and secured to prevent
accidental switch-on!
CAUTION
!
REMKO series RVS
26
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO RVS DC serie 50-80-130-180 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO RVS DC serie 50-80-130-180 in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO RVS DC serie 50-80-130-180

REMKO RVS DC serie 50-80-130-180 User Manual - German - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info