726584
56
Zoom out
Zoom in
Previous page
1/84
Next page
Error code: E3 / F5
Reason: If the fan speed of the indoor unit/outdoor unit falls below 300 rpm, the unit switches off
and the display shows error code E3 or E5
Cause:
n Electrical connection faulty
n Evaporator fan wheel defective
n Evaporator fan motor defective
n Control board faulty
Switch off voltage, switch on again 2
minutes later
. Is the error still
present?
NO
The unit operates normally.
YES
De-energise the unit and attempt to
turn the fan wheel by hand. Does it
rotate freely?
NO
Check the motor and the fan
wheel bearing, and replace the
defective parts.
YES
Check the electrical connections.
Are these correctly implemented?
NO
Correctly establish the electrical
connection
YES
Measure the voltage at the corre-
sponding connector plug on the con-
trol board (see section
Ä
‘Proce-
dure’ on page 57). Does the
measured voltage lie within the toler-
ance range?
NO
Replace the control board.
YES
Replace the fan motor. Is the fault
remedied?
NO
REMKO RVD series
56
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO RVD 1055 DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO RVD 1055 DC in the language / languages: English as an attachment in your email.

The manual is 5,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO RVD 1055 DC

REMKO RVD 1055 DC User Manual - German - 84 pages

REMKO RVD 1055 DC User Manual - Dutch - 84 pages

REMKO RVD 1055 DC User Manual - French - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info