587735
9
Zoom out
Zoom in
Previous page
1/28
Next page
9
COOL mode Use the “COOL” mode when you want to cool down the room to the desired tempera-
ture.
Decrease the temperature by pressing the button in 1°C Sc increments. The indoor
unit’s receiver indicates that the settings are being correctly received by beeping. After
approximately 3 minutes, the air-conditioner starts working. This delay is for safety pur-
poses for the compressor to prevent a “cycle” (compressor switches on and off). If the
room temperature falls approx. 2 C° below the set temperature, the unit automatically
stops cooling.
Functional process
COOL AUTO COOLING MODE
DRY mode Due to the low temperature of the refrigerant, the cooling register falls below the dew
point of the air which causes the moisture in the air to condense. The “DRY” mode de-
humidifies the room. After the “DRY” button has been pressed, the desired temperature
and the plate fin position can be set. The fan switches off at certain intervals to lower
the temperature of the plate fins.
DEHUMIDIFYING MODE
Functional process
DRY COOL
Fan button When the FAN button is pressed, the fan speed display “AUTO” becomes visible. The
speed is lowered each time the button is pressed.
Functional process
AUTO LOW MED HIGH
HEAT mode In the “HEAT” mode, you can heat the room during spring and fall. Press the “HEAT
button. Keep in mind that the temperature you set must be higher than the room tem-
perature! If the set room temperature is exceeded by 1 C°, the unit switches the heating
off automatically. If the room temperature is below the set temperature, the heating
switches on again after 3 minutes.
Functional process
HEAT DRY HEATING MODE
AIR
DIRECTION button
The button cannot be activated for these units.
FAN mode
Functional process
FAN HEAT FAN MODE
To activate circulation mode, press the button once or several times until “FAN”
appears on the display. In this mode, the unit is used for circulation. It does not cool or
heat.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO RKS371H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO RKS371H in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO RKS371H

REMKO RKS371H User Manual - German - 26 pages

REMKO RKS371H User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info