587573
8
Zoom out
Zoom in
Previous page
1/16
Next page
8
Installation Instructions
The standard unit is equipped with a connecting line be-
tween the indoor unit and the outdoor unit which makes
it ready for operation.
It comes with various accessories for assembling the out-
door unit.
There are different ways to set up the indoor unit and
outdoor unit which are described in the following sec-
tion.
Indoor unit
The inner unit is installed in the desired location with
the air outlet side facing the room. When installing the
unit, make sure to comply with the safety instructions.
Connecting line
The connecting line can be guided to the outside
through a partially opened window or door. The con-
necting line can be detached from the indoor unit which
means that it can also be guided through a wall lead-
through (Ø min. 60 mm).
When laying the connecting line, follow these instruc-
tions:
The connecting line may never be pinched or bent.
The connecting line may not be pulled or subject to
any other mechanical force.
To prevent the formation of condensation, the hose
insulation and the protective cover may not be dam-
aged.
Outdoor unit
The outdoor unit expels the heat transported out of the
room to the outside air. To perform this function, the
outdoor unit can either be placed on the floor or hung
on an outside wall.
Floor installation
To set up the outdoor unit on a terrace or balcony, it is not
necessary to use fasteners.
The outdoor unit must be placed horizontally and pro-
tected from direct sunlight. A minimum distance of 20
cm must be maintained between the air intake side and
the wall.
Air must be able to flow freely out of the unit (min. 50
cm distance to other objects). The connecting line is
guided through an opening in a door or window (Fig. 6
and 7).
Mounting on the outside wall with wall holder
1. Attach the supplied wall holders to the wall.
2. Hang the to outdoor unit in the wall holders and se-
cure it with the screws supplied M4 (Fig. 8 and 9).
The wall holders can be attached with the fasteners
supplied (dowel 6 mm and screws). If these are not suit-
able for the material the wall is made of, fastening units
with adequate retention force are to be placed.
When mounting the holder, make sure that the line is
not placed under any strain and that the insulation is
not damaged.
Fig. 7
Fig. 8
There must be a minimum of 20 cm between the
back of the unit (air intake) and the wall.
Fig. 6a Fig. 6
20 cm
20 cm
Make sure to maintain the minimum distances. The
air coming out of the indoor unit and the outdoor
unit may not be blocked.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO RKL480 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO RKL480 in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO RKL480

REMKO RKL480 User Manual - German - 16 pages

REMKO RKL480 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info