587564
9
Zoom out
Zoom in
Previous page
1/16
Next page
9
Water Tank
The integrated water tank must be emptied from time to
time.
When the water tank is full, an alarm
goes on and the "FULL TANK" display
blinks.
The unit switches off automatically.
FULL TANK
1. Wait a few minutes before removing
the water tank.
In our experience, a little bit of water
always drips out of the unit.
2. Carefully remove the full water tank.
3. The contents of the tank can be
poured down a drain.
4. We recommend cleaning the tank
with a clean cloth.
Unit Shut Down
8. Reinsert the water tank properly.
9. Clean the dust filter and the unit
housing.
10. Follow the service instructions.
11. Store the unit in an upright position
away from dust and direct sun light.
12. Protect the unit from dust with a
plastic cover.
1. Switch the unit off with the "On / Off"
button.
2. Unplug the power cable after press-
ing the "On / Off" button.
This will prevent the device’s elec-
tronic system from being damaged.
1. Let the device run for approximately
2 hours in ventilation mode (FAN) to
dry the surface of the evaporator
plate fins.
This will prevent unpleasant odors
when the device is put back into op-
eration.
2. Switch the unit off with the "On / Off"
button.
3. Remove the plug from the plug
socket and secure the power cable
on the holder.
4. Make sure that the cable is not bent
and that there are no kinks.
5. Empty the water tank.
6. Remove the remaining water via the
tube to the left in the opening for the
water tank.
7. Make sure to replace the sealing cap
on the tube.
If the sealing cap is not replaced,
water may leak out.
Prior to longer idle periods
Remove the dust filter.
If the dust filter is only slightly dirty,
clean off the dust, for example, with
a vacuum cleaner.
If the dust filter is very dirty it is to be
washed with a lukewarm soap solu-
tion (max. 40° C) and then to be
rinsed with clear water.
Make sure that the dust filter is com-
pletely dry and undamaged before
you reinstall it.
In case of extreme dirt the dust filter
is to be replaced.
Cleaning the Dust Filter
The device is equipped with a dust filter. It can be opened
on the left side and removed.
Cleaning the plastic housing:
For cleaning, please use only a clean, soft, slightly
damp cloth to carefully wipe off the housing. Please ad-
here to the following instructions:
Never use chemical cleaning agents or polish to
clean the device.
These can corrode the surface.
Make sure that moisture does not enter the device.
Water and other liquids may never be sprayed di-
rectly into the unit.
This can damage the electrical system.
Maintenance and Service
Never use the unit without the dust filter installed!
Without a dust filter, the evaporator’s plate fins be-
come dirty and the performance of the unit suffers.
The power cable must be unplugged before any
work is done on the unit!
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO RKL240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO RKL240 in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO RKL240

REMKO RKL240 User Manual - German - 16 pages

REMKO RKL240 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info