726575
9
Zoom out
Zoom in
Previous page
1/28
Next page
4 Operation
The system can be operated by means of the control panel on the device or via the standard infrared remote
control unit. The functional operation of the buttons among themselves is identical, however
, the designation
can vary. The batteries must be correctly inserted before the infrared remote control is used.
9 6
7
5
8
2
1
REMOTE
DRAIN WATER
AUTO
SWING
TIMING
ON
OFF
TIMER
SET
RESET
THERMO CONTROL
COMP. ON
DE-
HUM.
FAN
LO
MED HI AUTO
MODE
3
4
10
11
12
13
14
15
13
16
Fig. 3: Control panel
Legend
1
„ON / OFF“ button
2
„MODE“ button (Fan speed-mode)
The fan speed is indicated by means of LEDs in
the selected modes AUT
O-HI-MED-LO or circu-
lated air mode FAN.
3
LED „AUTO“ (Fan mode)
Indication of the automatic fan operation.
4
LED „HI“ (Fan mode)
Indication of the high fan operation.
5
LED „MED“ (Fan mode)
Indication of the average fan operation.
6
LED „LO“ (Fan mode)
Indication of the low fan operation.
7
LED „DE- HUM.“ (Dehumidifying mode)
Indication of the dehumidifying mode.
8
LED „FAN“ (Circulated air )
Indication of the circulated air
.
9
LED „COMP. ON“ (Compressor operation)
The controller controls the cooling output by
means of switching the compressor on or of
f. Com-
pressor operation is indicated by means of the
LED. If the LED flashes, the compressor will be
activated in max. 3 mins.
10
Button „▼ ▲“ Temperature setting
The desired nominal temperature can be set with
the „▼ ▲“ buttons in steps of 1°C between 16 and
30°C.
11
Display
The display shows the set nominal temperature or
the residual time of a programmed timer
.
12
"ON" and "OFF" timer
The timer function can be used to switch the
device on or of
f automatically in hourly intervals
( „▼▲“ buttons) by means of pressing the "SET"
button. The function can be used to program the
switch-on timer when the device is off and the
switch-off timer when the device is on, for up to 24
hours. Both timers can be deleted by means of
pressing the "RESET" button.
13
LED „TIMING ON and OFF“
Indicator of activation (LED ON) or deactivation
(LED OFF) of the timing on and of
f
14
„AUTO SWING“ button
The direction of the discharged air via the oscil-
lating fins can be adjusted to fixed or oscillating by
pressing the "AUT
O SWING" button.
15
LED „DRAIN WATER“
If the pump is unable to transport the collected
condensate then this is signalised via an acoustic
alarm in combination with the flashing "DRAIN
WATER" LED. The device will be operational again
after the container is emptied by means of the con-
densate drain.
16
Infrared receiver
The device receives the signals from the infrared
remote control via the sensor
.
17
„FAN“ button(only on the infrared remote con-
trol)
The ventilator speed can be adjusted by means of
pressing the "F
AN" button.
9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO RKL 495 DC S-Line at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO RKL 495 DC S-Line in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO RKL 495 DC S-Line

REMKO RKL 495 DC S-Line User Manual - German - 28 pages

REMKO RKL 495 DC S-Line User Manual - Dutch - 32 pages

REMKO RKL 495 DC S-Line User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info