726838
6
Zoom out
Zoom in
Previous page
1/24
Next page
6
REMKO PWN H / HK
Installation
Installation
1. 2 holes must be drilled 130mm
apart in the wall/ceiling
to which the unit is to be
attached and the customer
must provide wall plugs and
screws for these, which are
designed for the unit’s weight
and are suitable for the wall/
ceiling (max. M10).
2. Attach the mounting bracket
to the wall using washers with
Ø 40mm.
3. Screw in the stud pin completely
with the short side in the unit’s
bottom screw nut.
4. Attach the unit to the mounting
bracket and guide the stud
screw through the mounting
bracket's long hole. To do this,
tilt the unit at an angle in order
to be able to insert the stud
screw into the long hole.
5. Put the washer and the lock
washer on the stud screw and
tighten using the hexagonal nut.
6. Affix the mounting bracket
to the top of the unit. To
do this, put the washer and
lock washer onto the M8 screw.
Then guide the M8 screw
through the mounting bracket
from the top and screw into
the screw nut on the unit.
1 - Mounting bracket 4 - Lock washer
2 - Washers, Ø 40mm 5 - M8 screw
3- Stud screw 6 - Hexagon nut
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO PWN HK serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO PWN HK serie in the language / languages: English as an attachment in your email.

The manual is 2,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO PWN HK serie

REMKO PWN HK serie User Manual - German - 24 pages

REMKO PWN HK serie User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info