587903
9
Zoom out
Zoom in
Previous page
1/28
Next page
9
s
s
s
Assembly note
During the assembly or
disassembly of the gas hose,
it is necessary to counter-hold
the unit by the gas connection
nipple with an open-end wrench
size 17, whilst observing the left-
handed thread.
This process also applies to
the pressure controller, hose
breakage protection and all further
gas components.
Tighten gas hose:
Turn the union nut anticlockwise
Loosen gas hose:
Turn the union nut clockwise
Icing up of gas cylinders
With insufficiently dimensioned
gas supply systems, there is a risk
of the pressurised gas cylinder
icing up.
Due to the reduction of the gas
pressure, it is no longer possible
to guarantee the correct gas
supply to the unit.
Crystalline frost formation on
the gas cylinder(s) must not
be defrosted with naked flames,
glowing objects, radiators, etc.
In order to avoid the gas
cylinder(s) icing up, it is necessary
to configure the gas supply
in accordance with the unit
connection value, the time
in operation and the ambient
temperature of the supply tank.
1
6
2
4
5
4
3
6
5
6
Attachment multi-cylinder set (accessory)
In order to guarantee a regular gas take-off insofar as possible,
all cylinder valves must be open.
The cylinder battery can be easily expanded,
through the use of additional sets.
Legend:
1 = Gas hose to the unit
2 = Hose breakage protection
3 = Gas pressure controller
4 = HP hose 0.4 m
5 = T-connection
6 = Cylinder valve
Connecting the gas supply
1. Connect the
pressure controller
to the gas cylinder
or gas supply
system.
Observe the left-hand thread!
2. Open cylinder
valve(s) or shut-
off valve
of the supply
line.
With simultaneous discharge
from multiple gas cylinders,
all valves must be opened.
3.
Push the unlock
button on
the hose breakage
protection
after opening
the valve(s).
This process is also necessary
after every cylinder change.
4. Check all gas connections for
leak-tightness using suitable
media.
For example with:
Soap solution
or
leak detection
spray.
NOTE
Because these are ball
nipple screw connections
in accordance with DIN 4815,
part 2, only appropriate,
fitting hoses may be used.
NOTE
Only hoses for liquid gas in
accordance with DIN EN 16436-1,
pressure class 30 may be used
for construction site operations.
counter-hold
counter-hold
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO PGT 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO PGT 100 in the language / languages: English as an attachment in your email.

The manual is 1,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO PGT 100

REMKO PGT 100 User Manual - German - 28 pages

REMKO PGT 100 User Manual - Dutch - 24 pages

REMKO PGT 100 User Manual - French - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info