726617
9
Zoom out
Zoom in
Previous page
1/48
Next page
3 Design and function
3.1 Unit description
The indoor unit is used to extract heat from the
indoor room being cooled. The outdoor unit then
expels this heat to the outside.
If combined heating/cooling units are operated as
heaters, the heat absorbed by the outdoor unit can
be discharged by the indoor unit into the room
being heated.
The unit is designed to be mounted high up on the
wall, in an indoor area. It is operated by an infrared
remote control or an optionally available cabled
remote control.
The indoor unit consists of a fin evaporator
, an
electronic expansion valve, evaporator fan, con-
troller and condensate tray. The indoor unit can be
combined with REMKO outdoor units from the
series MVV that provide sufficient cooling capacity.
The outdoor unit is controlled by the regulation of
the indoor unit.
Condensate pumps, cable remote controls and the
REMKO Smart-Control are available as accesso-
ries (control via the outdoor unit).
Refrigerant piping is used to connect the indoor
unit to the outdoor unit. The refrigerant piping is
distributed to several indoor units via the optionally
available distributor sets.
Fig. 2: Cooling cycle schematic
1: DC fan motor
2: Temperature probe T2B (suction pipe)
3: Temperature probe T1 (room temperature)
4: Temperature probe T2 (evaporator centre)
5: Evaporator
6: Electronic expansion valve
Fig. 3: System layout
A: Outdoor area
B: Indoor area
1: Indoor unit
2: Outdoor unit
3: Condensate drainage lines
4: Condenser fans
5: Outdoor unit power supply
6: Shut-off valves
7: Suction pipes (via distributor if necessary)
8: Control line
9: Liquid line (if necessary via distributor)
10: Power supply line to indoor unit
9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO MVW 452 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO MVW 452 in the language / languages: English as an attachment in your email.

The manual is 3,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO MVW 452

REMKO MVW 452 User Manual - German - 48 pages

REMKO MVW 452 User Manual - Dutch - 48 pages

REMKO MVW 452 User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info