726616
31
Zoom out
Zoom in
Previous page
1/48
Next page
DIP switch functions (continued)
Switch Function Setting
1)
Description
SW5
Cold air avoid-
ance in heating
mode
1 2
SW5
ON
The fan does not run when the heat exchanger fluid tempera-
ture is 15 °C or colder (factory setting)
1 2
SW5
ON
The fan does not run when the heat exchanger fluid tempera-
ture is 20 °C or colder
1 2
SW5
ON
The fan does not run when the heat exchanger fluid tempera-
ture is 24 °C or colder
1 2
SW5
ON
The fan does not run when the heat exchanger fluid tempera-
ture is 26 °C or colder
SW6
Control behav-
iour in heating
mode
1 2
SW6
ON
Cooling request is terminated when measured temperature
actual value is 6 °C higher than the set temperature setpoint
value (factory setting)
1 2
SW6
ON
Cooling request is terminated when measured temperature
actual value is 2 °C higher than the set temperature setpoint
value
1 2
SW6
ON
Cooling request is terminated when measured temperature
actual value is 4 °C higher than the set temperature setpoint
value
1 2
SW6
ON
The cooling request is terminated when the measured tempera-
ture actual value is equal to the set temperature setpoint value
SW7 Non functional
J1
Automatic restart
after power
failure
J1
Unit runs independently in the last operating mode
J1
Unit does not restart
ENC1
Power setting
(depending on
unit type)
ENC1
0: 1.8kW or 2.2kW; 1: 2.8kW; 2: 3.6kW; 3: 4.5kW; 4: 5.6kW; 5:
7.1kW; 6: 8.0kW; 7: 9.0kW; 8: 10.0kW/11.2kW; 9: 11.2kW;
A: 12.5kW; B: 14.0kW
1)
The black mark represents the DIP switch
31
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO MVW 282 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO MVW 282 in the language / languages: English as an attachment in your email.

The manual is 3,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO MVW 282

REMKO MVW 282 User Manual - German - 48 pages

REMKO MVW 282 User Manual - Dutch - 48 pages

REMKO MVW 282 User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info