726616
18
Zoom out
Zoom in
Previous page
1/48
Next page
Manual unit addressing
The MVV series outdoor units automatically assign
addresses to the indoor units during commis-
sioning. However
, these can also be assigned
manually (for example, for arrangement on the
Multi-Central-Controller).
By pressing the
key for longer than 5 seconds
the addressing mode of the IR remote control is
activated. The addressing mode can be exited by
pressing the key again for longer than 5 sec-
onds.
1. Querying the unit address
If the addressing mode (see above) is active, the
signal transmission must be activated by pressing
the key. The key can then be used to query
the unit address. The address appears directly on
the display or is coded as an LED flashing code
(for ceiling cassettes).
2. Assigning the unit address
If the addressing mode (see above) is active, the
signal transmission must be activated by pressing
the
key. Use the arrow keys to preselect
the desired address, then press the key to
transfer it to the unit.
REMKO MVW series
18
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO MVW 282 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO MVW 282 in the language / languages: English as an attachment in your email.

The manual is 3,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO MVW 282

REMKO MVW 282 User Manual - German - 48 pages

REMKO MVW 282 User Manual - Dutch - 48 pages

REMKO MVW 282 User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info