726599
49
Zoom out
Zoom in
Previous page
1/68
Next page
Error code E3: Communication error of board in the outdoor unit
Switch off power to the system for 1 minute, re-
establish power supply
, start system
YES
Are the LEDs on the control board flashing?
YES
Replace the control board
NO
Is the connection between the control board
and inverter board (CN1) established correctly?
NO
Establish the connection correctly
YES
Are 3.3. Volt present between the 3rd and 4th
contact from the bottom (GND and +3.3V) of
the plug CN201 on the control board?
NO
Replace the control board
YES
Is the connection between the inverter board
and power pcb (CN12) established correctly?
NO
Establish the connection correctly
YES
Is the voltage between P and N on the power
pcb 277 – 345 V
olt?
YES
Replace the control board
NO
Replace power pcb
Error code E4: Error probe T3 register condenser / T4 air intake
Is the probe correctly mounted on the circuit
board?
NO
Correctly mount the probe on the circuit board
YES
Is the probe visibly damaged?
YES
Replace probe
NO
Are the probe resistance values OK? (See
Ä
Chapter 11.3 ‘Resistances of the
temperature probes’ on page 59)
NO
Replace probe
YES
Replace indoor unit circuit board
49
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO MVV 1600 DC Duo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO MVV 1600 DC Duo in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO MVV 1600 DC Duo

REMKO MVV 1600 DC Duo User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info