726594
12
Zoom out
Zoom in
Previous page
1/68
Next page
3 Design and function
3.1 Unit description
In cooling mode, the outdoor unit serves to output
the heat extracted by the indoor unit from the room
being cooled. In heating mode, the heat taken up
by the outdoor unit can be discharged by the
indoor unit into the room to be heated. In both
operating modes, the output produced by the com-
pressor precisely matches requirements, and
thereby regulates the nominal temperature with
minimal temperature deviations. This "inverter
technology" results in energy savings over conven-
tional split systems and also reduces noise emis-
sions to a particularly low level. The outdoor unit
can be installed in an outdoor area or
, providing
that certain requirements are met, an indoor area.
The indoor unit is designed to be mounted high up
on the wall, in indoor areas. It is operated by an
infrared remote control. The outdoor unit com-
prises a circuit containing a compressor, a liquefier
with fin vaporisers, three electronic expansion
valves and a condenser fan. The outdoor unit is
combinable with REMKO indoor units from the
MXW, MXD, MXT and ATY ranges in accordance
with the cooling capacity (see "Combinations"
chapter). The outdoor unit refrigerant circuit is con-
trolled by the regulator in the indoor unit. In order
to enable operation of the device at low outdoor
temperatures, a thermal condenser pressure regu-
lator serves as winter fan speed control to regulate
the speed of the condenser fan.
Floor consoles, wall consoles and refrigerant pipes
are available as accessories.
TCE
TCE
TCE
2
1
4
3
5
8
9
10
11
6
7
TCE
TCE
14
15
12
13
Fig. 2: Cooling cycle schematic
1: Condenser
2: Condenser fan
3: Reversing valve
4: Compressor
5: Capillary tube throttle element
6: Suction pipe connection valve A
7: Suction pipe connection valve B
8: Suction pipe connection valve C
9: Suction pipe connection valve D
10: Suction pipe connection valve E
11: Injection pipe A
12: Injection pipe B
13: Injection pipe C
14: Injection pipe D
15: Injection pipe E
REMKO MVT series
12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO MVT 1403 DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO MVT 1403 DC in the language / languages: English as an attachment in your email.

The manual is 4,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO MVT 1403 DC

REMKO MVT 1403 DC User Manual - German - 78 pages

REMKO MVT 1403 DC User Manual - Dutch - 68 pages

REMKO MVT 1403 DC User Manual - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info