588042
22
Zoom out
Zoom in
Previous page
1/64
Next page
REMKO
WARMTEPOMP-MANAGER MULTITALENT-PLUS
Omschrijving Beschrijving
Software-nummer Weergave van het softwarenummer met index.
Cascade handbediening
Alleen bij cascades; de bedrijfsmodus Service moet actief zijn.
Instellen van het vermogen van de warmtegenerator (Bij schakelende meertraps warmtegeneratoren
kan de tweede trap door een vermogenseis van > 50% worden ingeschakeld).
Nadat de servicefunctie is beëindigd wordt de invoer automatisch gereset.
Brander Looptd Weergave van de looptijd van de warmtegenerator voor alle trappen.
Brander Startsg Weergave van start van de warmtegenerator voor alle trappen.
STB-test
Veiligheidstemperatuurbegrenzer-test met weergave van de temperatuur van de WE. (start de test
met de F-toets)
Klantendienst
Invoer van de datum voor de jaarlijkse onderhoudsmelding (bij jaar = „00“ geen melding) of invoer
van het aantal bedrijfsuren van de installatie waarna er een onderhoudsmelding dient te worden
weergegeven (bij bedrijfsuren < „50“ geen melding).
Reset gebruiker
Door middel van de reset-functie kunnen de diverse submenu's op de fabrieksinstellingen worden
gereset (fabrieksinstelling =„01“).
Reset specialist
Reset tijdprogramma
Communicatie BM 1 Afstandsbediening HK 1 op de BUS.
Communicatie BM 2 Afstandsbediening HK 2 op de BUS.
Communicatie KM
Communicatie met uitbreidingsmodule (voor extra verwarmingscircuits).
Overige menupunten
Relaistest
Selecteer het gewenste relais (01-11) met de draaiknop in het submenu Service
Het geselecteerde relais wordt 1 minuut lang ingeschakeld en alle andere relais worden uitgeschakeld.
Let erop dat voor deze functie een codenummer moet worden ingevoerd.
Als er 5 minuten lang verder geen bediening meer plaatsvindt, wordt de relaistest automatisch afgebroken
Relais Uitgang Beschrijving
00 Normaal bedrijf => Relais schakelt volgens de ingestelde functie
01 A1 Circulatiepomp verwarmingscircuit 1 (direct verwarmingscircuit) Aan
02 A2 Circulatiepomp verwarmingscircuit 2 (mengcircuit) Aan
03 A3 Omschakelventiel/Laadpomp tapwater
04 A4 Menger verwarmingscircuit 2 Open
05 A5 Menger verwarmingscircuit 2 Dicht
06 A6 Vrijgave warmtepomp Aan (Laadpomp loopt parallel)
07 A7
Bij CMF/CMT 120/160: Vrijgave koelen
Bij CMF 80/140: 2. Warmtegenerator Aan
Bij CMF 90/150 en CMT100/150 circulatiepomp koelen Aan
08 A8 Vrijgave 2e warmtegenerator (multifunctie 1-uitgang)
09 A9 Laadpomp binnenmodule (multifunctie 2-uitgang)
10 A10
Bij CMF 80/90: Condensatorpomp
Bij CMF/CMT 120/160, CMF 90/150, CMT 100/150: Omschakelventiel koelen (multifunctie 3-uitgang)
12 A12
Circulatiepomp of zonnepaneelpomp of laadpomp UP-vastebrandstofketel
(multifunctie 4-uitgang)
Niveau 4 - SERVICE - Beschrijving van de parameters en instelwaarden - Vervolg
22
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO MultitalentPlus Manager at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO MultitalentPlus Manager in the language / languages: Dutch as an attachment in your email.

The manual is 2,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info