587702
25
Zoom out
Zoom in
Previous page
1/32
Next page
Final tasks
Reassemble all disassembled
parts.
Familiarise the operator with
the system.
4. If no leaks are found, open
the stop valves by turning
them anti-clockwise as far as
they will turn using a hexagon
spanner. If leaks are found,
repair the faulty connection. It
is imperative that the vacuum
creation and drying steps are
repeated!
5. Switch on the mains switch or
circuit breaker.
6. Use the remote control to
switch on the unit and select
the cooling mode, maximum
fan speed and lowest target
temperature.
7. Measure and record all
the required values in the
commissioning report and
check the safety functions.
8. Check the unit's control
element using the functions
described in the chapter
"Operation".
Timer, temperature setting,
fan speeds and switching to
ventilation or dehumidifying
mode.
9. Check the correct function
of the condensation line by
pouring distilled water into the
condensation tray.
A bottle with a spout is
recommended for pouring the
water into the condensation
tray.
10.
Switch the indoor unit to
cooling mode.
11.
Check the correct function and
settings of all control and safety
devices during the test run.
12.
Check the control system in the
indoor unit using the functions
described in the operating
manual.
Timer, temperature settings and
all mode settings.
Unit dimensions
We reserve the right to modify the dimensions and constructional design as part of the ongoing technical development process.
All values in mm
ML 262 DC AT to ML 352 DC AT
760
530
295
268
590
ML 522 DC AT
270
590
530
290
770
790
275
190
940
275
200
13.
Check the overheating,
outdoor, indoor, outlet and
vaporisation temperatures and
record the measured values in
the commissioning report.
14.
Switch the indoor unit to
heating mode.
15.
Check all the previously
described safety devices and
functions during the test run.
16.
Enter the measured data in the
commissioning report.
17.
Remove the pressure gauge.
Check that seals have been
fitted in the sealing caps.
ML 262 DC IT / ML 352 DC IT
ML 522 DC IT
25
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO ML262 DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO ML262 DC in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO ML262 DC

REMKO ML262 DC User Manual - German - 32 pages

REMKO ML262 DC User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info