587592
16
Zoom out
Zoom in
Previous page
1/24
Next page
16
Minimum distances for the indoor units
The distances required for smooth operation of the indoor
unit are specified in the following figure.
Dimensions in mm
120
120
200
1500
120
Minimum distances
These safety zones ensure that air can flow freely in and
out of the unit, that maintenance and repair work can be
performed and they protect the unit from damage.
Minimum distances for the outdoor units
The figure below indicates the minimum distances that
must be maintained to ensure that the outdoor units oper-
ate properly.
ML 260 ML 350 ML 520 ML 680
A 100 mm 150 mm
B 700 mm 900 mm
C 400 mm
D 100 mm 150 mm
E 400 mm 600 mm 200 mm
Wall lead-throughs
Wall lead-throughs are necessary to establish the con-
nection between the indoor unit and the outdoor unit.
Please observe the following:
A lead-through of at least 70 mm in diameter must
be created.
The lead-through must be placed at an incline of at
least 10 mm between the inside and outside.
Before beginning work, make sure that there are no
supply pipes (water, etc.) located in the vicinity of
the wall lead-through.
We recommend cushioning the inside of the hole or
lining it with a PVC pipe to prevent damage to the
pipes.
Control line
Refrigerant
suction pipe
Condensation pipe
Refrigerant
injection pipe
If REMKO refrigerant pipes are used, the electrical
control line and the condensation pipe must be pro-
vided by the customer.
Therefore, the lead-through to be created must be
adapted according to the pipes provided by the cus-
tomer.
After assembly is complete, the wall lead-through
must be sealed with a suitable sealing compound.
Do not use any materials containing cement or lime!
A
B
E
C
D
Attaching the wall mount
The units must be attached with suitable screws and
dowels. The attachment points are displayed in the
following figure.
Lead-through options
Prior to installation, take a look at the various options
for lead-throughs of the refrigerant, condensation and
control lines (see figure below).
1 Opening on the wall right 2 Opening through the wall rear
3 Opening on the wall bottom 4 Opening through the wall rear
5 Opening on the wall left
3
4
2
1
5
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO ML260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO ML260 in the language / languages: English as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO ML260

REMKO ML260 User Manual - German - 28 pages

REMKO ML260 User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info