587592
6
Zoom out
Zoom in
Previous page
1/24
Next page
6
Button functionality
The following settings can be made using the remote control at a distance of no more than 7m. Point the remote
control at the receiver on the right side of the indoor unit. The unit beeps to confirm that a button has been pressed
and the signal has been correctly received.
By pressing the CLOCK button inside the battery slot, the time is programmed.
“CLOCK” blinks on the display and the current time is set using the HR. and MIN. but-
tons. Pressing the CLOCK button again closes the programming function and the dis-
play no longer blinks.
CLOCK button
Functional process
CLOCK HR./ MIN. CLOCK
By pressing the ON / OFF button, the air conditioner is activated or deactivated. The
settings and setting values programmed before the unit was last switched off appear
on the display.
ON / OFF button
Functional process
ON/OFF ON/OFF
By pressing the RESET button inside the battery slot, the remote control can be reset .
Then, the time must be programmed (see “CLOCK” button).
RESET button
Functional process
RESET 5 sec. Time setting
buttons
The button reduces the desired target temperature and the button increases the
target temperature. This setting is only possible in cooling mode. In automatic mode,
the button decreases the fixed temperature by 1°C and the button increases the
fixed temperature by 1°C. It is not possible to set the temperature. In dehumidifying
mode, the temperature cannot be set.
Functional process
Cooling mode
Automatic mode
The display
disappears
after 1 min
.
The blinking dot on the remote control
indicates that the remote control is ready
for use.
A symbol on the display shows that the
settings are being transmitted.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO ML260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO ML260 in the language / languages: English as an attachment in your email.

The manual is 1,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO ML260

REMKO ML260 User Manual - German - 28 pages

REMKO ML260 User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info