726567
41
Zoom out
Zoom in
Previous page
1/68
Next page
Connection of a cable remote control with week
program (MCC-1 controller):
Optionally
, the multifunction controller with week
program MCC-1 can be connected to the indoor
unit.
The connection also takes place via the supplied
multifunction board to the terminals X, Y and E
(see Fig. 49).
Fig. 49: Terminals
In order for the multifunction controller MCC-1 to
recognise the indoor unit, an address must be
assigned to the unit via the DIP switch of the
adapter board (see
Fig. 50). Addresses 0-63 can
be assigned. For the corresponding settings, see
Fig. 51.
Fig. 50: DIP switch
Fig. 51: DIP switch settings
The factory setting is programmed to address 0.
The DIP switch S1 specifies the address range
(e.g. both switches to OFF = address 0-15). The
rotary switch ENC2 has 16 positions with which it
stipulates the respective specific address (e.g. DIP
switch S1 = both OFF and rotary switch ENC2 = 2
gives unit address 2).
The device with the pre-set address appears on
the display of the multifunction controller
. When
connecting multiple indoor units to a multifunction
controller, terminals X, Y and E of the respective
indoor unit must be looped through to the next
indoor unit by the customer. Different addresses
must be assigned for the various indoor units.
41
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO ML 355 DC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO ML 355 DC in the language / languages: English as an attachment in your email.

The manual is 3,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO ML 355 DC

REMKO ML 355 DC User Manual - German - 68 pages

REMKO ML 355 DC User Manual - Dutch - 68 pages

REMKO ML 355 DC User Manual - French - 72 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info