587553
5
Zoom out
Zoom in
Previous page
1/12
Next page
TIP
5
“Dehumidify“
mode
1.
Attach the air outlet hose to the wall
bushing or the window.
2.
Activate the device using the “Power“
button (1).
3.
Press the “Mode“ button (2) until the
“Dehumidify“ LED (9) lights up; the fan
is automatically switched to the “Med“
or medium fan speed stage.
Fan“
mode
1.
Activate the device using the “Power“
button (1).
2.
Press the “Mode“ button (2) until the
“Fan“ LED (9) lights up.
3.
Select the fan setting using the “Fan
Speed“ button (3):
“High“ highest speed
“Med“ medium speed
“Low“ lowest speed
4.
The room temperature is not infl uenced
and remains constant. For this reason,
the temperature and time setting
“Timer/Temp. Adjust“ buttons (5/6)
cannot be used.
“Cool“ mode
1.
Attach the air outlet hose to the wall
bushing or the window.
2.
Activate the device using the “Power“
button (1) .
3.
Press the “Mode“ button (2) until the
“Cool“ LED (9) lights up.
4.
Select the fan setting using the “Fan
Speed“ button (3):
“High“ highest speed
“Med“ medium speed
“Low“ lowest speed
5. I
f the “Room Temp.“ LED (12) lights up,
the current room temperature is shown
in the display (7).
6.
As soon as the (4/5/6) button is
pressed, the display switches from the
room temperature to the set tempera-
ture (LED 13 lights up) and shows the
desired temperature for 15 seconds.
7
.
Set the desired room temperature using
the “Timer/Temp. Adjust“ button (5/6).
The up arrow (5) increases the set value
shown in the display (7), while the
down arrow (6) decreases it.
Timer“ time delay (4)
You can turn the device on and off
automatically using the timer. To do so,
an activation/deactivation delay is pro-
grammed.
Automatic activation
1.
Activate the device using the
“Power“ button (1).
2.
Select the mode and make all set-
tings for the desired mode.
3
.
Deactivate the device using the
“Power“ button (1) .
4
.
Press the “Timer“ button (4).
5
.
Set the time using the “Timer/
Temp. Adjust“ button (5/6).
Only whole hours can be entered.
6
.
The
LED (11) fl ashes.
7
.
The device activates automatically
at the set time.
Automatic
deactivation
1
.
The device is running in the previ-
ously set mode.
2
.
Press the “Timer“ button (4).
3
.
Set the remaining run time using
the “Timer/Temp. Adjust“ button
(5/6).
Only whole hours can be entered.
4
.
The
LED (11) fl ashes.
5
.
The device deactivates automati-
cally at the set time.
Cool
mode
You can achieve a pleasant
room climate by selecting
a set temperature that is a
maximum of 4 to 7°C below
the outdoor temperature.
“Timer“ time delay (4)
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO MKT250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO MKT250 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO MKT250

REMKO MKT250 User Manual - German - 20 pages

REMKO MKT250 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info