587552
2
Zoom out
Zoom in
Previous page
1/12
Next page
MKT 240
Recessed grip
Recessed grip
Control
panel
Infrared
Infrared
receiver
receiver
Transport
rollers
rollers
Air directing
plate ns
plate ns
2
Before delivery, this device was sub-
jected to numerous material, function,
and quality tests. Nevertheless, the
device may present a danger if used by
untrained personnel, improperly, or not
according to regulation!
Observe the following notices:
The device is not suited for out-
door operation.
The device may not be set up and
operated in rooms at risk of explo-
sion and in atmospheres containing
oil, sulphur, or salt.
Make sure it is at a suffi cient
security distance to infl ammable
objects.
Do not place any objects on the
device.
Observe the minimum clearances
(Fig. 2).
Do not insert any objects into air
inlets and outlets.
Erect the device on an even, stable
surface. Never place it on its side
(Fig. 3).
Operate the device only when it is
upright.
Do not expose the device to direct
water spray.
Operate the device only within its
permissible operating limits (16 to
35°C).
Do not pull on or bend the mains
supply line.
Protect all electrical lines of the
device from damage, even from
animals.
Select the extension lines of the
mains supply line depending on
mains supply line depending on
the connected load of the device,
the connected load of the device,
the line length, and the intended
the line length, and the intended
use.
Do not lay lines under carpeting.
Do not lay lines under carpeting.
Never operate the device with-
Never operate the device with-
out an air fi lter.
Never direct the air ow at
Never direct the air ow at
people.
Never open the device housing
Never open the device housing
as there is a danger of an electri-
as there is a danger of an electri-
cal shock.
Work on the cooling system and
Work on the cooling system and
the electrical equipment may be
the electrical equipment may be
carried out only by an
carried out only by an
authorised specialist.
authorised specialist.
Transporting the device
Transporting the device
Before transport, switch off the
device and pull the mains plug.
Transport the device only in an
upright position.
We recommended that any
condensate be drained using the
condensate drain spout on the
back side of the device before
transport.
After every transport of the
device, wait at least 5 minutes
before recommissioning it
(Fig. 4).
Safety Notices
Operation other than as de-
scribed in these instructions is
prohibited. Nonobservance leads
to the extinguishment of any li-
ability and warranty claims.
Fig.
2
Minimum clearances
Side 500 mm
Front 500 mm
Rear 400 mm
Top 100 mm
Scope of Supply
1 MKT 240 air conditioner
1 Infrared remote control
2
Batteries (type AAA/1.5 V)
1
Air outlet hose with connection
pipe adapter and
win
dow jet
Exhaust air
outlet
Connecting line
with plug
with plug
Condensate drain
spout with plug
Air inlet
(circulation air)
with air lter
Window
Window
jet
jet
A
ir outlet
hose
Air inlet
(exhaust air)
Fig.
1
MKT 240
MKT 240
Caution
TIP
CAUTION
DANGER
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO MKT 240 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO MKT 240 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO MKT 240

REMKO MKT 240 User Manual - German - 12 pages

REMKO MKT 240 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info