587590
5
Zoom out
Zoom in
Previous page
1/32
Next page
The equipment is shipped in sturdy
transport packaging. Immediately
check the equipment on delivery
and make a note of any damage
or missing parts on the delivery
note. Inform the forwarding agent
and contractual partner. Warranty
claims at a later date will not be
accepted.
The MD 261-351 room air
conditioning units have a REMKO
MD...AT outdoor component as
well as an indoor unit MD...IT.
The outdoor component serves
to output the heat extracted by
the indoor unit from the room
being cooled. In heater operation,
the heat taken up by the outdoor
component can be discharged
by the indoor unit into the room
to be heated. In both operating
modes, the performance of the
compressor is adjusted precisely
to the requirement which thereby
regulates the set temperature with
minimal temperature variation.
This "inverter-technology" enables
power saving over a conventional
split-system and also reduces noise
emissions to a particularly low
level.
The outdoor component can be
installed outside or in indoor areas,
if certain requirements are met.
The indoor unit is designed for the
upper wall area in the interior. It
is operated via an infrared remote
control.
The outdoor component consists
of a refrigerant circuit with
compressor, fin liquefier, liquefier
fan, reverse flow valve and flow
regulator. The outdoor component
is controlled via the regulation of
the indoor unit.
The indoor unit consists of
a fin evaporator, evaporator
fan, regulation system and
condensation pan.
Floor consoles, wall consoles,
refrigerant pipes and condensation
pumps are available as accessories.
Unit description
Transport and
packaging
The connection between the indoor unit and the outdoor component
made with refrigerant pipes.
Schematic of refrigerant circuit in indoor unit - cooling
Vaporiser fan
Connection to suction pipe
Connection to injection pipe
Vaporiser
Schematic of exterior refrigerant circuit
M
M
Liquefier fan Reverse flow valve
Liquefier Filter dryer Capillary tube flow regulator
Connection
valve
Injection pipe
Connection
valve
Suction pipe
Compressor
Connection
Manometer
Outdoor
component
System layout
Stop valve
Indoor unit
Liquefier fan
Outdoor area
Injection pipe
Suction pipe
Control cable
Mains cable
Condensation pipe
Indoor area
Condensation pipe
5
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO MD261 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO MD261 in the language / languages: English as an attachment in your email.

The manual is 1,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO MD261

REMKO MD261 User Manual - German - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info