Manual REMKO KWK ZW serie (page 5 of 40) (English)

726832

Zoom out

Zoom in

1/40

1.6 Safety notes for the operator

The operational safety of the units and compo-

nents is only assured providing they are used as

intended and in a fully assembled state.

nThe units and components may only be set up,

installed and maintained by qualified per-

sonnel.

nProtective covers (grille) over moving parts

must not be removed from units that are in

operation.

nDo not operate units or components with

obvious defects or signs of damage.

nContact with certain unit parts or components

may lead to burns or injury.

nThe units and components must not be

exposed to any mechanical load, extreme

levels of humidity or extreme temperature.

nSpaces in which refrigerant can leak sufficient

to load and vent. Otherwise there is danger of

suffocation.

nAll housing parts and device openings, e.g. air

inlets and outlets, must be free from foreign

objects, fluids or gases.

nThe units must be inspected by a service tech-

nician at least once annually. Visual inspec-

tions and cleaning may be performed by the

operator when the units are disconnected from

the mains.

1.7 Safety notes for installation,

maintenance and inspection

nAppropriate hazard prevention measures must

be taken to prevent risks to people when per-

forming installation, repair, maintenance or

cleaning work on the units.

nThe setup, connection and operation of the

units and its components must be undertaken

in accordance with the usage and operating

conditions stipulated in this manual and comply

with all applicable regional regulations.

nLocal regulations and laws such as Water

Ecology Act must be observed.

nThe power supply should be adapted to the

requirements of the units.

nUnits may only be mounted at the points pro-

vided for this purpose at the factory. The units

may only be secured or mounted on stable

structures, walls or floors.

nMobile units must be set up securely on suit-

able surfaces and in an upright position. Sta-

tionary units must be permanently installed for

operation.

nThe units and components should not be oper-

ated in areas where there is a heightened risk

of damage. Observe the minimum clearances.

nThe units and components must be kept at an

adequate distance from flammable, explosive,

combustible, abrasive and dirty areas or

atmospheres.

nSafety devices must not be altered or

bypassed.

1.8 Unauthorised modification

and changes

Modifications or changes to units and components

are not permitted and may cause malfunctions.

Safety devices may not be modified or bypassed.

Original replacement parts and accessories

authorised by the manufactured ensure safety. The

use of other parts may invalidate liability for

resulting consequences.

1.9 Intended use

Depending on the model and the equipment, the

units are only intended to be used as a cold water

drain to cool or warm the operating medium water

or a water-glycol mixture within a closed medium

cycle.

Any different or additional use is a non-intended

use. The manufacturer/supplier assumes no lia-

bility for damages arising from non-intended use.

The user bears the sole risk in such cases.

Intended use also includes working in accordance

with the operating and installation instructions and

complying with the maintenance requirements.

The threshold values specified in the technical

data must not be exceeded.

1.10 Warranty

For warranty claims to be considered, it is essential

that the ordering party or its representative com-

plete and return the "certificate of warranty" to

REMKO GmbH & Co. KG at the time when the

units are purchased and commissioned.

The warranty conditions are detailed in the "Gen-

eral business and delivery conditions". Further-

more, only the parties to a contract can conclude

special agreements beyond these conditions. In

this case, contact your contractual partner in the

first instance.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of REMKO KWK ZW serie in the language / languages: English as an attachment in your email.

The manual is 2,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO KWK ZW serie

REMKO KWK ZW serie User Manual - German - 40 pages

REMKO KWK ZW serie User Manual - Dutch - 40 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

REMKO KWK ZW serie Manual

Product: