587985
36
Zoom out
Zoom in
Previous page
1/60
Next page
The units are equipped with
a phase sequence relay which
prevents an operation of the
controller in case of an incor-
rect direction of rotation of the
electrical mains connection.
If the controllers shows the
fault code "APS" during com-
missioning, the rotating field
must be changed.
NOTE
During manual bleeding, any
emerging glycol mixtures must
be disposed of separately.
NOTE
Additional checks
General checks
Check of the minimum clear-
ances for the correct dimen-
sions
Check of the possibility of
dissipating the cooling and/or
heating capacity via the cold
water and/or hot water con-
sumer (indoor unit)
Electrical checks
Check of the electrical con-
nection for the correct phase
sequence
Functional check of the cooling
/ heating mode enable (option-
al)
Functional check of the opera-
tion / standby enable (optional)
Check of the medium circuit
Check of the circulation pump
for free running
Check whether all valves are
open
Check of the medium circuit
Setting of the nominal volume
flow rate of the circulation
pump
Check of the cooling circuit
Check of the cooling circuit for
leaking oil/refrigerant
Check of the cooling circuit for
pressure tightness
Diaphragm expansion vessel
The pre-pressure of the dia-
phragm expansion vessel must
be adapted individually accord-
ing to the system setup, me-
dium volume, and installation
site.
If necessary, the installation
site must be changed. For this
purpose, a manufacturer release
is required.
For cooling and heating sys-
tems, the volume and pre-pres-
sure of the diaphragm expan-
sion vessel must be adapted to
both types of operation and an
additional diaphragm expansion
vessel must be integrated into
the system if necessary.
A minimum volume of 5 litres
per kW cooling or heating ca-
pacity must be planned for the
overall system.
Line regulating valves
The excess pressure at the
individual cold water consumers
determined in the pipe network
design
must be adjusted at the line
regulating valves.
Safety valve
The safety valves and their cor-
rect function must be checked.
The drain line of the valves
must be checked for function
and seal tightness.
If necessary, the installation
site must be changed. For this
purpose, a manufacturer release
is required.
REMKO KWG
36
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO KWG950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO KWG950 in the language / languages: English as an attachment in your email.

The manual is 7,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO KWG950

REMKO KWG950 User Manual - German - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info