587985
5
Zoom out
Zoom in
Previous page
1/60
Next page
erant is conducted to an air-cooled
condenser, which condenses the
refrigerant under high pressure as
a result of the heat exchange. The
air emerging from the condenser
heats the environment. Using a
controllable injection valve, the
liquid refrigerant is conducted back
to the evaporator, where the cycle
begins once again.
To regulate the cooling capacity,
a return temperature dependent,
multi-stage regulation is used,
which guarantees autonomous
unit operation in addition to all
safety functions. A floating contact
enables a remote release.
The unit is designed for outdoor
installation. It can also be used in-
doors under certain circumstances.
The cooling circuit of the unit con-
sists of an evaporator, compressor,
thermal injection valve, condenser,
condenser fan, pressure trans-
ducer, and high and low pressure
monitors. According to design, the
medium circuit consists of a plate
heat exchanger, circulation pump,
expansion vessel, safety valve,
differential pressure monitor, and
storage tank.
Accessories include winter fan
The units are provided in a stable
transport packaging. Please check
the units immediately at delivery,
note down any damage or miss-
ing parts on the delivery note, and
inform the shipping agent and your
contracting partner.
We assume no guarantee for later
complaints.
Description of the unit
Transport and packaging
During cooling mode, the unit (air-
cooled chiller) takes up the heat
from the operating medium to be
cooled (water or a water/glycol
mixture) within a closed medium
circuit in the evaporator (flat plate
evaporator) and delivers it to the
closed cooling circuit. As a result
of the heat exchange, the medium
cools and the refrigerant in the
cooling circuit evaporates under
low pressure.
The gaseous refrigerant enters
an electrically driven compressor
(scroll construction), which increas-
es the pressure and temperature of
the refrigerant. The gaseous refrig-
controls, cabled remote controls,
crankcase heaters, vibration damp-
ers, heaters for anti-frost protec-
tion medium, protective grids,
glycol concentrate, and technical
unit handover.
Intended
use
According to design and equip-
ment, the units are intended for
use only as chillers for cooling an
operating medium of water or
a water-glycol mixture within a
closed medium circuit.
Any other use or any use going
beyond this application is consid-
ered improper. The manufacturer/
supplier is not liable for resulting
damage. The user alone bears the
risk.
Intended use also includes the
observance of the operating and
installation instructions, as well as
the maintenance conditions.
Legend:
1 Circulation pump
2 Manual bleeder
3 Flat plate evaporator
4 Differential pressure monitor
5 Diaphragm expansion vessel
6 Safety valve
7 Shut-off valve
8 Victaulic connectors
9 Medium storage tank
10 Free-cooling register
11 Three-way, free-cooling valve
12 Filling/draining valve
13 Medium inlet sensor
14 Medium outlet sensor
15 System return sensor
16 Ambient temperature sensor
Unit setup for medium circuit
KWG
8213
14
3 4
KWG...P
871213
14
3 4
KWG...SP
14
871213
9
12
56
3
4
5
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO KWG950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO KWG950 in the language / languages: English as an attachment in your email.

The manual is 7,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO KWG950

REMKO KWG950 User Manual - German - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info