587983
17
Zoom out
Zoom in
Previous page
1/60
Next page
Care and maintenance Decommissioning
Fixed-term
decommissioning
1. Decommission the internal units
of the system using the remote
control.
2. Switch off the unit using the
internal controller in the chiller
(or using the remote control).
3. Check the glycol percentage.
4. Check the unit for visible dam-
age and clean it as described in
the "Care and maintenance"
chapter.
5. If possible, cover the unit with a
plastic film to protect it against
the influence of weather.
If only water and no water/
glycol mixture is used in the
medium circuit, the water
must be drained from the
system parts during the
downtime in areas at risk of
frost.
At recommissioning, the
drained water volume must be
adapted again!
ATTENTION
Non-fixed-term
decommissioning
The units and components must
be disposed of according to
regional regulations, for example,
by authorised specialist companies
for disposal and recycling or
community collection points.
REMKO GmbH & Co. KG or your
responsible contracting partner is
happy to name a specialist com-
pany in your vicinity.
The regular care and observance of
some basic prerequisites guarantee
malfunction-free operation and a
long service life of the unit.
Before all work on the units,
the power supply must be dis-
connected and secured against
reactivation!
ATTENTION
Care
Keep the unit free of soiling,
plants, and other deposits.
Clean the unit only using a
moistened cloth.
Do not use a water jet.
Do not use sharp, abrasive, or
solvent-container cleaners.
Before longer downtime peri-
ods, clean the fins of the unit:
Maintenance
We recommend concluding a
maintenance contract with an
annual maintenance interval
with a corresponding
specialist company.
In this way, you can guarantee
the operational safety
of the system at all times!
TIP
Type of work
Check / maintenance / inspection
Commis-
sioning
Monthly
Semi-annual
Annual
General
Clean the dirt trap
Check the medium filling
Check the circulation pump
Soiling / damage to the condenser
Check the glycol quality
Check the voltage and current
Check the direction of rotation
Check the compressor
Check the fan
Check the refrigerant filling amount
Check the condensate drain
Check the insulation
Seal tightness check of cooling circuit
1)
The legal requirements
demand a seal tightness
check of the cooling circuit
depending on refrigerant
filling amount. The check
and documentation thereof
must be performed by
corresponding expert
personnel.
NOTE
1) See note
17
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO KWG750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO KWG750 in the language / languages: English as an attachment in your email.

The manual is 7,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO KWG750

REMKO KWG750 User Manual - German - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info