Manual REMKO KWG400 (page 4 of 60) (English)

587980

Zoom out

Zoom in

1/60

Safety notices

Disposal of packaging

All products are packaged care-

fully in environmentally sound

materials for transport. Make a

valuable contribution to the reduc-

tion of waste and conservation of

raw materials and dispose of the

packaging material only at the cor-

responding collection points.

Disposal of units and compo-

nents

During the manufactur-

ing of units and components, only

recyclable materials are used.

Make a contribution to environ-

mental protection by making sure

that units or components (such

as batteries) do not get into the

domestic waste, but rather are dis-

posed of only in an environmen-

tally sound manner according to

regional regulations, for example,

using authorised disposal and recy-

cling companies or at community

collection points.

Environmental

protection and

recycling

Before the initial start-up of the

unit, carefully read the operating

instructions. They

contain useful tips, instructions ,

and warnings to prevent risks

to people and property . The

non-observance of the operating

instructions can lead to an endan-

germent of people, the environ-

ment, and the system and thus to a

loss of possible claims.

■

Keep these operating instructions

and the refrigerant data sheet in

the vicinity of the units.

■ Only expert personnel may

set up and install the units and

components.

■ The set-up, connection, and op-

eration of the units and compo-

nents must take place within the

conditions for use and operation

according to the instructions and

correspond with valid regional

requirements.

■ The units for mobile use must

be set up vertically on an even

foundation in an operationally

safe manner. Units for stationary

operation may be operated only

when permanently installed.

■ Conversions to or changes in the

units or components provided

by REMKO are not permissible

and could cause malfunctions.

■ The units and components must

not be operated in areas with an

increased risk of damage. The

minimum clearances must be

observed.

■ The electrical power supply must

be adapted to the unit require-

ments.

■ The operating safety of the units

and components is guaran-

teed only in case of proper use

and when they are completely

mounted. Safety equipment

must not be changed or by-

passed.

■ Units or components with no-

ticeable defects

or damage must not be oper-

ated.

■ All housing parts and unit open-

ings such as air inlet and outlet

openings must be free of foreign

objects, liquids, or gases.

■ The units and components re-

quire a sufficient safety distance

to ignitable, explosive, flam-

mable, aggressive, and contami-

nated areas or atmospheres.

■ Touching certain unit parts or

components can result in burns

or injuries.

■ Installation, repairs, and main-

tenance may be performed only

by authorised expert personnel;

visual inspections and cleaning

can be performed by the plant

owner when the units and com-

ponents are de-energised.

■ During the installation, repair,

maintenance, or cleaning of the

units, suitable measures must be

taken to exclude the endanger-

ment of people by the unit.

■ The units or components must

not be exposed to

mechanical loads, extreme mois-

ture, and direct sunlight.

Guarantee

The prerequisite for any

warranty claim is

that the customer or its recipient

has returned the completed "War-

ranty Document" included in de-

livery and the completely filled-out

„Commissioning Log“ to REMKO

GmbH & Co. KG at the time of the

sale and commissioning

of the equipment. The warranty

conditions are listed in the "General

Terms and Conditions of Business

and Delivery." Beyond that, special

agreements can be made only be-

tween the contracting partners. As

a consequence, please contact your

direct contracting partner first.

REMKO KWG

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of REMKO KWG400 in the language / languages: English as an attachment in your email.

The manual is 7,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO KWG400

REMKO KWG400 User Manual - German - 60 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

REMKO KWG400 Manual

Product: