726827

REMKO KWD serie 25-35-45-55-70-85-100 Manual

35
Zoom out
Zoom in
Previous page
1/52
Next page
8 Electrical wiring
8.1 General connection
and safety instructions
DANGER!
All electrical installation work is to be performed
by specialist companies. Disconnect the power
supply when connecting the electrical terminals.
n We recommend that a main/repair switch be
installed close to the unit. This must be pro-
vided by the customer.
n The power supply is made at the indoor unit, a
control line to the chiller is not necessary.
n If a condensate pump, which is available as an
accessory, is used in conjunction with the unit,
the pump switch-off contact switches off the
power supply or the valve if necessary.
n The terminal block is located inside the unit. It
can be accessed after opening the cover.
Proceed as follows to connect:
1. Open the control box cover by removing the
fixing screws and lifting of
f the cover.
2. Feed the de-energised cable through the
edge protection rings on the control box and
clamp the cable in the strain relief
3. Then connect the cable in accordance with
the connection diagram.
4. Connect the electrical plugs on the cover to
the mating connectors on the cassette. It is
not possible to incorrectly connect these.
5. Mount all removed parts.
NOTICE!
Check all plug and terminal connections to
verify that they are tight and make a permanent
contact. T
ighten as required.
Fig. 45: Connection terminals KWD 25-55
35
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO KWD serie 25-35-45-55-70-85-100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO KWD serie 25-35-45-55-70-85-100 in the language / languages: English as an attachment in your email.

The manual is 4,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO KWD serie 25-35-45-55-70-85-100

REMKO KWD serie 25-35-45-55-70-85-100 User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info