Manual REMKO KWD serie 25-35-45-55-70-85-100 (page 27 of 52) (English)

726827

Zoom out

Zoom in

1/52

5 Installation Instructions

for qualified personnel

Important notes prior to installation

Observe the operating manuals for the indoor unit

and the outdoor unit when installing the entire

system.

n Observe the operating manuals for the indoor

unit and the chiller or heating system when

installing the entire system.

n The indoor units and chillers work independ-

ently

. A connecting line between the two is not

necessary.

n Transport the unit in its original packaging as

close as possible to the installation location.

You avoid transport damage by doing so.

n Check the contents of the packaging for com-

pleteness and check the unit for visible trans-

port damage. Report any damage immediately

to your contractual partner and the shipping

company.

n Select an installation location which allows air

to freely flow through the air inlet and outlet

(see section "Minimum clearances").

n Do not install the unit in the immediate vicinity

of devices which generate intensive thermal

radiation. Installation in the vicinity of thermal

radiation reduces the unit output.

n Lift the unit at the corners and not by the

medium or condensate drainage connections.

n The medium connection lines, valves and con-

nections must have vapour density insulation.

If necessary, also insulate the condensate

drainage line. In dual systems with cooling and

heating modes, the requirements of the current

Energy Savings Ordinance (EnEV) are to be

complied with.

n Seal off open refrigerant piping with suitable

caps or adhesive strips to prevent the infiltra-

tion of moisture and never kink or compress

the refrigerant piping.

n Avoid unnecessary bends. This minimises the

pressure loss in the lines.

n Install all electrical wiring in accordance with

applicable DIN and VDE standards.

n Ensure the electrical cables are properly con-

nected to the terminals. Otherwise there is a

risk of fire.

n Service openings should be provided in the

suspended ceiling to allow maintenance

access to the control box or the valve

assembly.

n Any ventilation ducts or pipes and connection

fittings, which are used to connect a second

room or supply fresh air, should be insulated

with diffusion-tight material.

n Only install the valve assembly or other attach-

ments once the indoor unit has been installed.

Installation materials

The unit is attached using 4 threaded rods pro-

vided by the customer

In order to be able to complete installation, wall

plugs, trapezoidal sheet metal supports, steel pro-

files, fixing clamps for medium and condensate

drainage lines (as well as laying ducts), and con-

nection fittings for condensate drainage lines are

required.

Selecting the installation location

The indoor unit is specifically designed for hori-

zontal mounting in suspended ceilings with Euro-

raster dimensions. However, it can also be

installed in suspended ceilings with different

dimensions.

Take into account the installation height of the

equipment.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of REMKO KWD serie 25-35-45-55-70-85-100 in the language / languages: English as an attachment in your email.

The manual is 4,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO KWD serie 25-35-45-55-70-85-100

REMKO KWD serie 25-35-45-55-70-85-100 User Manual - German - 52 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

REMKO KWD serie 25-35-45-55-70-85-100 Manual

Product: