587908
18
Zoom out
Zoom in
Previous page
1/44
Next page
18
REMKO GPM
K4
K3K2
K1
KM
K-
K+
HZG san info
Press the K1 hzg button, the
following display appears.
Timer mode
In this mode, the temperature con-
trol operates within a fixed time
window.
Press the KM button,
HZG appears
on the left in the text bar.
Press the K1
HZG button and in the
following display press the K4
uhr
button.
In the following display, set the
flashing time/hour indication to
the required value with the K+ or
K- button.
K4
K3K2
K1
KM
K-
K+
timer
4 6 8 10 12 14 16 18 20 22 24 2
17:00fr
24,0
The timer mode is indicated in the
display with
timer.
The timer can be set up to 12
hours in 30 minute steps.
After lapse of the timer program-
med time, the unit switches back
to the automatic mode again.
K4
K3K2
K1
KM
K-
K+
dauer temp
20,0
02:00
Press the K4 temp button and set
the flashing temperature indication
to the required value with the K+
or K- button.
Press the KM button to return to
the operational display.
Fault message display
The temperature control ATR-6
can display possible system faults
and supply diagnostic information.
Possible Unit faults are indicated
by a flashing triangle and ”Reset
heating” in the following display.
!
K4
K3K2
K1
KM
K-
K+
reset
4 6 8 10 12 14 16 18 20 22 24 2
08:25di
18,5
kessel
!
K4
K3K2
K1
KM
K-
K+
fehlercode
!
1
Faulty code analysis is described in
the chapter “Troubleshooting” in
the operating instructions.
By pressing the K4 (>>) button,
the fault code (e.g. 1) is displayed.
NOTE
After 5 unsuccessful reset att-
empts, the control electronics
of the unit are permanently
locked.
In order to restart the unit, it
must be disconnected from the
mains supply.
NOTE
The timer program can be
ended prematurely by pressing
the
KM
button, the
K1
hzg but-
ton and the
K1
auto button.
NOTE
The heating program can be
reactivated by pressing the
KM
button, the
K1
hzg button and
the
K1
auto button.
Prior to troubleshooting and
clearing faults, no reset must be
performed.
ATTENTION
K4
K3K2
K1
KM
K-
K+
auto on off uhr
Switch off the unit
Press the KM button,
HZG appears
in the text bar.
K4
K3K2
K1
KM
K-
K+
13:50fr
20,0
NOTE
In this mode, frost protection
is automatically activated at a
temperature of 5°C.
Press the K3
off button, the fol-
lowing display and symbol appear.
After locating and clearing the
fault, the unit must be reset via the
K1
reset button.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO GPM 55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO GPM 55 in the language / languages: English as an attachment in your email.

The manual is 4,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO GPM 55

REMKO GPM 55 User Manual - German - 44 pages

REMKO GPM 55 User Manual - Dutch - 44 pages

REMKO GPM 55 User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info