587905
19
Zoom out
Zoom in
Previous page
1/44
Next page
19
ATTENTION
In a heating mode, parameter
10 must be reset to the value 0.
Summer mode (only
ventilation)
In the summer months, ventilation
can also take place via the
temperature control ATR-6.
However, this function must
initially be activated on the control
board.
Setting parameter value
Press and hold the KM button
for about 10 seconds until the
following display appears.
K4
K3K2
K1
KM
K-
K+
Info Reg err
Press the K4 (>>) button to access
the following display.
Press the K4 (>>) button to access
the following display.
K4
K3K2
K1
KM
K-
K+
spra par park
Press the K3 park button and in
the following display press the
K4 (>>) button several times until
param k 10 appears.
With the K+ or K- button, set the
value to 1.
Press and hold the KM button for
10 seconds to return to the basic
display again.
K4
K3K2
K1
KM
K-
K+
param k 10
1
Setting the PROG SAN value
To set the ventilation function, the
prog san value must be set to the
appropriate mode.
The procedure is as follows:
Press the KM button, the following
display appears.
K4
K3K2
K1
KM
K-
K+
HZG san info
K4
K3K2
K1
KM
K-
K+
HZG san info
Activating/deactivating
ventilation
Press the KM button, the following
display appears.
K4
K3K2
K1
KM
K-
K+
prog reg uhr
Press the K4 (>>) button several
times until
prog san appears.
With the K+ or K- button, set the
value to 1.
Press the K2
reg button to access
the following display.
K4
K3K2
K1
KM
K-
K+
tem raum t1
10,0
K4
K3K2
K1
KM
K-
K+
prog san
1
This operation can be ended by
pressing the KM button.
K4
K3K2
K1
KM
K-
K+
on off uhr
The ventilation function can be
activated with the K2
on button
or deactivated with the K3
off
button.
Ventilation mode
on is indicated
on the display with a water tap
symbol.
Ventilation can be programmed
for a fi xed time with the K4
uhr
button.
The timer can be set up to 12
hours in 30 minute steps.
A water tap symbol and
timer are
indicated on the display.
NOTE
The timer program can be
ended prematurely by pressing
the
KM
button, the
K2
san
button and the
K3
off button.
By pressing the K2
san button, the
following display appears.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO GPM 15 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO GPM 15 in the language / languages: English as an attachment in your email.

The manual is 4,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO GPM 15

REMKO GPM 15 User Manual - German - 44 pages

REMKO GPM 15 User Manual - Dutch - 44 pages

REMKO GPM 15 User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info