587905
16
Zoom out
Zoom in
Previous page
1/44
Next page
16
REMKO GPM
Automatic mode
In this program, the temperature
control controls the wall gas heater
fully automatically.
The room temperature, week day
and current time in hours and
minutes are indicated permanently
on the LCD display.
Program example:
Programming a day temperature
(T3) of 20.5°C Monday to Friday
from 7
00
- 17
00
.
Programming a medium
temperature of 18°C lunch time
from 12
00
- 14
00
.
Programming a night temperature
(reduction temperature) of 15°C
from 17
00
- 7
00
.
Programming a continuous night
temperature (T1) of 15°C from
Saturday to Sunday.
Settings can be programmed as
follows:
Press the KM button,
HZG appears
on the left in the text bar.
K4
K3K2
K1
KM
K-
K+
prog reg uhr
K4
K3K2
K1
KM
K-
K+
prog reg uhr
Make a selection with the K1 prog
button. The following display
appears.
K4
K3K2
K1
KM
K-
K+
tag reg cop vor
4 6 8 10 12 14 16 18 20 22 24 2
13:00mo
Press the K1 tag button
repeatedly to select the week day
(e.g. Monday).
Make a selection with the K2 reg
button, the temperature windows
T1 and T3 appear.
K4
K3K2
K1
KM
K-
K+
t1 t2 t3
..
Press the K4 button (>>), the
following display appears.
Existing settings must always
first be deleted on
Level
T1 with
the
K+
and
K-
buttons.
Position the cursor on the
clock from where the program
is to be started on the next
temperature window (e.g. 7
00
).
No corrections (overwrite) can
be made on levels T2 and T3.
ATTENTION
Press the K2 reg button, the
following display with the
temperature window T3 appears.
K4
K3K2
K1
KM
K-
K+
tem raum t1
10,0
REG SAN Value
By pressing the K4 (>>) button
twice again (after the temperature
window 3), the
Reg san display
appears.
Adjust the flashing temperature
indication appropriate to the unit
installation with the K+ and K-
buttons.
See the table under the section
“Modulation” (page 9) in these
operating instructions.
Programming can be ended by
pressing the KM button.
The temperature control has 3
temperature windows.
T1 = Reduction temperature
(night)
T2 = Medium temperature
T3 = Day temperature
The procedure for setting and
changing is as follows:
Press the KM button,
HZG appears
on the left in the text bar.
Press the K4 (>>) button, the
following display appears.
With the K+ and K- buttons select
the required temperature (e.g.
15°C) for the temperature window
T1.
Press the K4 (>>) button to display
the temperature window T2.
With the K+ and K- buttons set
the required temperature (e.g.
18°C) for T2.
Press the K4 (>>) button to display
the temperature window T3. With
the K+ and K- set the required
temperature (e.g. 20.5°C) for T3.
Setting temperature window and REG SAN value
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO GPM 15 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO GPM 15 in the language / languages: English as an attachment in your email.

The manual is 4,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO GPM 15

REMKO GPM 15 User Manual - German - 44 pages

REMKO GPM 15 User Manual - Dutch - 44 pages

REMKO GPM 15 User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info