587879
11
Zoom out
Zoom in
Previous page
1/20
Next page
11
Press the power key [].
-All displays and device functions
are now switched off-
If the units are
inactive for long
periods, disconnect
them from the mains
power supply.
Empty the condensate container
completely and dry with a clean
cloth.
Beware of dripping condensate!
The units must be cleaned and
dried completely before storing.
Each time before changing the
location, drain residual condensate
from the condensate trap.
To do this, use the union nut [A]
and the sealing plug [B] to open
the condensate connection nozzle.
Tip the unit slightly backwards to
drain the residual condensate into
a suitable container.
Then re-seal the condensate
connection nozzle carefully in
reverse order.
When storing the units, cover with
a plastic sheet/foil if necessary
and store in an upright position in
a sheltered and dry location.
Continuous unit operation
with external condensate
outlet
The units are equipped with
a condensate connection nozzle on
the rear.
A special (1m) drainage hose that
is supplied can be connected here.
1. Unscrew the union nut [A] (turn
anticlockwise).
2. Pull the sealing plug [B] out of
the connection nozzle.
3. Push the drainage hose with the
smooth end through the rear of
the union nut [A].
Shutdown
Ensure that the drainage hose
is placed at an incline to the
drain to allow the condensate
to drain without hindrance!
CAUTION
!
After you plug in the adapters
[SA], , the pump is immediately
ready for operation and can convey
water immediately if required.
CAUTION
!
The units are only permitted
to be stored upright in
a suitable storage location that
is protected against dust and
direct sunlight.
NOTE
The pump function is only
possible via the connection
adapter [SA] provided.
NOTE
Continuous unit operation via
the internal condensate pump
For applications in locations
without a drain, the devices are
fitted with a condensate pump
especially for this.
You can use this to provide various
condensate drainage options
according to the local conditions.
The patented condensate pump
connectionpanel [KP] is located on
the rear of the units.
Carefully connect the connection
adapter [SA] provided here.
4. Screw the drainage hose onto
the connection nozzle using the
union nut [A].
A B
The hose supplied as standard has
a length of 5 metres. The customer
can extend this to 10 metres if
required.
CAUTION! Do not kink the hose!
A height difference of up to
5 metres can be bridged using the
integrated condensate pump.
In unattended permanent
operating mode, the condensate
should preferably be drained into
a lower-level drain.
If using an external collection
container (pan, bucket, etc.), the
unit must be placed at a correct
height.
SA
KP
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO ETF460 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO ETF460 in the language / languages: English as an attachment in your email.

The manual is 4,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO ETF460

REMKO ETF460 User Manual - German - 20 pages

REMKO ETF460 User Manual - Dutch - 20 pages

REMKO ETF460 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info