Manual REMKO ETF 360 Eco (page 4 of 28) (English)

794467

Zoom out

Zoom in

1/28

REMKO series ETF Eco

It is evident that the corrosion

rate below 50 % relative humidity

(RH) is low, and below 40 % is

negligible.

The corrosion rate increases

signiﬁcantly above 60 % RH.

This threshold for damage as the

result of humidity also applies to

other materials, such as powdery

substances, packaging, wood and

electronic units.

Buildings may be dried in a variety

of ways:

1. By heating and air exchange:

The air in the room is heated

in order for moisture to be

removed and then this air is fed

outside. All of the energy that

is involved is lost together with

the moist air that is released.

2. By air dehumidiﬁcation:

The moist air that is present

within an enclosed space is

continuously dehumidiﬁed

according to the condensation

principle.

The correlations occurring when

air is dehumidiﬁed are based on

physical laws.

These are depicted here in

graphical form in order to provide

you with a brief overview of the

principles of air dehumidiﬁcation.

The use of

REMKO air dehumidiﬁers

■

Even if windows and doors

are well insulated, water and

moisture are still capable of

penetrating thick concrete walls.

■

The water required for setting

when producing concrete,

mortar and plaster etc. may only

be diffused after 1-2 months.

■

Even moisture trapped in the

masonry after a ﬂood is released

very slowly.

■

The same is also true of

moisture contained in stored

materials for example.

The moisture (water vapour)

released from parts of a building

or materials is absorbed by the

surrounding air. As a result, the

moisture content increases, which

ultimately gives rise to corrosion,

mould, rot, peeling of paint and

other unwanted damage.

By way of example, the diagram

shows the corrosion rate of metal

in different levels of humidity.

Air dehumidification

With regard to energy

consumption, air dehumidiﬁcation

has one distinct advantage:

Energy expenditure is limited

exclusively to the air volumes

present. The mechanical heat that

is released by the dehumidiﬁcation

process is fed back into the room.

Under normal use, the

air

dehumidiﬁer

uses approximately

25 % of the energy that is

required for the

“heating and

ventilating” principle.

Relative air humidity

Our ambient air is a gaseous

mixture which always contains

a certain volume of water in the

form of water vapour. This volume

of water is speciﬁed in g per kg of

dry air (absolute moisture content).

1 m3 of air weighs approx. 1.2 kg

at 20 °C

Depending on the temperature,

each kg of air is only capable of

absorbing a certain volume of

water vapour. Once this capacity

has been reached, the air is

referred to as “saturated” and has

a relative humidity (RH) of 100 %.

Relative humidity is understood

to mean the ratio between the

current quantity of water vapour in

the air and the maximum possible

quantity of water vapour at the

same temperature.

The ability of the air to absorb

water vapour increases as

the temperature rises. I.e.

the maximum possible (absolute)

water content becomes greater as

the temperature rises.

Corrosion speed

Relative humidity %

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of REMKO ETF 360 Eco in the language / languages: English as an attachment in your email.

The manual is 3.28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO ETF 360 Eco

REMKO ETF 360 Eco User Manual - German - 28 pages

REMKO ETF 360 Eco User Manual - Dutch - 28 pages

REMKO ETF 360 Eco User Manual - French - 28 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

REMKO ETF 360 Eco Manual

Product: