794472
15
Zoom out
Zoom in
Previous page
1/24
Next page
9 Care and maintenance
9.1 General
Regular care and observation of some basic points
will ensure trouble-free operation and a long
service life.
DANGER!
Before undertaking any work on the units, the
mains plug must be removed from the mains
socket.
NOTICE!
Adjustment and maintenance work may only be
carried out by authorised qualified technicians.
nObserve the regular care and maintenance
intervals
nIn accordance with the operating conditions,
the units must, if necessary, be checked at
least yearly by a specialist to ensure that they
are in a condition that is safe to use
nKeep the units free of dust and other debris
nOnly clean the units with a dry or moistened
cloth
nNever subject to direct jets of water. such as
high-pressure cleaners etc.
nNever use abrasive or solvent-based cleaners
nEven with heavy contamination, use only suit-
able cleaners
nCheck the inlet and outlet grille for contamina-
tion on a regular basis
nCheck the units for mechanical damage and
have defective parts properly replaced
nCheck that the safety devices and the protec-
tive devices are operating correctly at regular
intervals
nKeep the probe for the safety devices free of
dust and dirt
nBe careful not to damage the temperature limit-
er’s probe or capillary tube when removing or
mounting the protective outlet grille
nObserve maintenance and care intervals
WARNING!
An electrical safety check must be carried out in
accordance with VDE 0701 after any work on
the units.
NOTICE!
Replace defective or damaged parts immedi-
ately and only with original spare parts.
Testing
The strapping plug enclosed with the unit is for
maintenance or testing purposes according to VDE
0701. To test, perform the following steps:
1. Connect the strapping plug supplied [2] to the
thermostat socket [1] on the unit
2
1
2. Perform the test on the unit
3. Remove the strapping plug again
15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO ELT10-HT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO ELT10-HT in the language / languages: English as an attachment in your email.

The manual is 4.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO ELT10-HT

REMKO ELT10-HT User Manual - German - 24 pages

REMKO ELT10-HT User Manual - Dutch - 24 pages

REMKO ELT10-HT User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info