587892
4
Zoom out
Zoom in
Previous page
1/16
Next page
4
REMKO ELT series
Safety notes Unit description
The units are portable electric
heating units for industrial
applications.
The units are operated exclusively
with electric power and have been
designed in such a way that they
can be used fully automatically,
universally and in a straightforward
manner.
The units are equipped with
specially enclosed electric heating
resistors, low noise and low-
maintenance axial fans, safety and
aftercooler thermostats, a room
thermostat socket and power cable
with protective contact plug.
The units conform to the
fundamental health and safety
requirements of the appropriate
EU stipulations.
The units are dependable and offer
ease of operation.
The units may be used among
other things for the following:
Drying newly completed
buildings
Spot heating outdoor
workspaces or fire-proof
manufacturing facilities and
halls
Continuous or temporary room
heating
De-icing machines, vehicles and
non-combustible warehoused
goods while adhering to the
relevant safety distances
Always observe the respective local building code and fire prevention
guidelines as well as the guidelines of the accident prevention and
insurance associations when using the units.
The units have been subjected
to extensive material, functional
and quality inspections prior to
delivery. However, dangers can
arise from the units if they are used
improperly or not as intended by
untrained personnel!
Please observe the following notes:
The personnel tasked with
operating the units must check
the units for visible defects on
the operating and safety devices
as well as the presence and
function of the protective devices
prior to starting work
Inform the supervisor if defects
are discovered!
In the event of defects that
endanger the operational safety
of the unit, operation must be
discontinued immediately
Observe the respective local
regulations and the relevant
electrical safety measures when
using the units
Maintain safety distances to
combustible materials
An unobstructed air inlet and air
outlet must be guaranteed at all
times
The air outlet must not be
constricted or equipped with
pipe or hose lines
Never insert foreign objects into
the units
The units must not be covered
during operation
Safety devices must not be
bypassed or disabled
The units must not be operated
in the vicinity of bathtubs,
showers, swimming pools etc.
The units must not be operated
directly below a wall socket
The units must not be exposed
to direct jets of water
e.g. pressure washers etc.
Never allow water to enter the
units
The units must not be installed
or operated in potentially
flammable or explosive
environments
The units must not be installed
or operated in atmospheres
containing oil, sulphur or salt
All electrical cables for the
units must be protected against
damage, even damage caused
by animals
The units must be set up in
a stable, horizontal position
Safety devices must not be
bypassed or disabled.
CAUTION
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for REMKO ELT 10-6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of REMKO ELT 10-6 in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of REMKO ELT 10-6

REMKO ELT 10-6 User Manual - German - 16 pages

REMKO ELT 10-6 User Manual - Dutch - 12 pages

REMKO ELT 10-6 User Manual - French - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info